Communication Cable – G3 / Modular Controller / Data Station Plus to Texas Instruments 500 Series

11 May 2026

PUT PHOTO HERE

Downloads

1. Communication Cable – G3 / Modular Controller / Data Station Plus to Texas Instruments 500 Series
cblsie07_0.docx

Cable Details

Cable Part Number: CBLSIE07
Length: 10 feet
Application: G3 / Modular Controller / Data Station Plus to Texas Instruments 500 Series
Interface: RS‑485

Connector Information

Controller Side: RJ45
PLC Side: DB9 Male

Connector Pinout

FROM RLC UNIT	Signal Name	RJ45 Pin	DB9 Male Pin
1	TxB	1	5
2	TxA	2	8
3	RxA	3	7
4	RxB	4	1
5	TxEN	5	—
6	COMM	6	6
7	TxB	7	—
8	TxA	8	—

Wiring Notes

The table above denotes the pin names of the RS‑485 port.
When connecting devices, the pin name at the RS‑485 port is connected to the opposite pin name at the destination device.
Pins shown with no destination connection are not used.

RS‑485 Port Reference

(From RLC unit)