This technote is for crimson products that get stuck in the boot loader. Depending on the unit you have this presents itself as a flashing STS light or for units with screens it will display the model unit in the center with a V number in the bottom corner.
Required Software: You should use the same version of software that the unit you have is currently running.
Primary Connection: USB or RS232
Solution:
You need to create a simple crimson database to load into the unit. To do that open crimson and click file>New and select your product. Open the data tag section in the Navigation pane and create a tag.
Apply power to the unit and after you apply power during the startup repeatedly try to load the simple database into the unit using link>update or F9. Your goal is to catch a small timing window that the unit is able to receive databases over USB or RS232.
HMS Technical Support
If you have any questions or trouble, contact HMS Technical Support by clicking here.
