List of PAX Series Option Cards and Compatible Models

Please note:

PAX Lite series panel meters, example part number PAXLxxxx, do not accept option cards.  Some models do have dual form C setpoint relays standard. 

List of the available option cards and the PAX model numbers that will support them.  

APPLICABLE PRODUCTS 

• PAXCDC10- RS485 with terminal block option card.
• PAXCDC1C- RS485 with dual RJ11 option card.
• PAXCDC20- RS232 with terminal block option card.
• PAXCDC2C- RS232 with DB9 option card
• PAXCDC40- Modbus communication with terminal block option card
• PAXCDC4C- Modbus communication with dual RJ11 option card
• PAXCDL10- Analog output option card
• PAXCDS10 - Dual Form C setpoint relay card.
• PAXCDS20- Quad Form A setpoint relay card.
• PAXCDS30- Quad setpoint NPN option card.
• PAXCDS40 - Quad setpoint PNP option card.
• PAXUSB00- USB interface card for programming via Crimson 2.1 software.
• PAXCDS50 - Dual triac, dual SSR driver setpoint card.
• PAXCDS60 - Quad Form C setpoint relay card, used with units manufactured after July 2014. 

PRE-REQUISITES 

The above option cards can be used with the following unit models, with the noted exceptions. 

• PAXCxxxx - Only setpoint option cards supported.
• PAXDxxxx
• PAXDPxxx- For Modbus communications, use PAXCDC10 and set comms type to Modbus.
• PAXHxxxx
• PAXPxxxx
• PAXIxxxx- For Modbus communications, use PAXCDC10 and set comms type to Modbus.
• PAXRxxxx- Only setpoint option cards supported
• PAXSxxxx
• PAXTxxxx

IN THIS ARTICLE

• List of available PAX series option cards
• List of PAX series model exceptions
• PAX option card product manuals

ADDITIONAL INFO 

PAX Analog Product Manual 

PAX Digital Product Manual 

PAXCDC SER Product Manual 

PAXCDC MB Product Manual 

PAXCDL Product Manual 

 PAXCDS Product Manual 

© HMS Networks AB 2025