Invalid configuration allowed in the RTU configuration

06 Jun 2025

Abstract

An invalid configuration is allowed in the tool kit but the RTU does not support. This document identifies what this configuration is and that it will not work.

Products

ST-IPm-8460

Use Case: Invalid serial configuration

Required Software

Sixnet I/O Tool Kit 5.0.100 or above

ST-IPm-8460 firmware 7.0.100 or above

Invalid serial port configuration will be allowed but it will not work in the RTU

Serial port configuration. The Sixnet I/O Tool Kit will allow the user to configure 7 data bits, Space Parity and 1 Stop bit in the serial ports, but this is not supported by the RTU firmware.

Disclaimer

It is the customer's responsibility to review the advice provided herein and its applicability to the system. Red Lion makes no representation about specific knowledge of the customer's system or the specific performance of the system. Red Lion is not responsible for any damage to equipment or connected systems. The use of this document is at your own risk. Red Lion standard product warranty applies.

Red Lion Technical Support

If you have any questions or trouble contact Red Lion Technical Support by clicking here or calling 1-877-432-9908.

For more information: http://www.redlion.net/support/policies-statements/warranty-statement