List of the available option cards and the PAX model numbers that will support them.
APPLICABLE PRODUCTS
- PAXCDC10- RS485 with terminal block option card.
- PAXCDC1C- RS485 with dual RJ11 option card.
- PAXCDC20- RS232 with terminal block option card.
- PAXCDC2C- RS232 with DB9 option card
- PAXCDC40- Modbus communication with terminal block option card
- PAXCDC4C- Modbus communication with dual RJ11 option card
- PAXCDL10- Analog output option card
- PAXCDS10 - Dual Form C setpoint relay card.
- PAXCDS20- Quad Form A setpoint relay card.
- PAXCDS30- Quad setpoint NPN option card.
- PAXCDS40 - Quad setpoint PNP option card.
- PAXUSB00- USB interface card for programming via Crimson 2.1 software.
- PAXCDS50 - Dual triac, dual SSR driver setpoint card.
-
PAXCDS60 - Quad Form C setpoint relay card, used with units manufactured after July 2014.
PRE-REQUISITES
The above option cards can be used with the following unit models, with the noted exceptions.
- PAXCxxxx - Only setpoint option cards supported.
- PAXDxxxx
- PAXDPxxx- For Modbus communications, use PAXCDC10 and set comms type to Modbus.
- PAXHxxxx
- PAXPxxxx
- PAXIxxxx- For Modbus communications, use PAXCDC10 and set comms type to Modbus.
- PAXRxxxx- Only setpoint option cards supported
- PAXSxxxx
- PAXTxxxx
IN THIS ARTICLE
ADDITIONAL INFO
Link to PAX Analog input product manual
Link to PAX digital input product manual
Link to PAXCDC serial option product manuals
Link to PAXCDC Modbus Product Manual
Link to PAXCDL10 analog output option product manual
Link to PAXCDSxx setpoint relay product manual