Comparison of the connectors, supported protocols and further features.
APPLICABLE PRODUCTS
CAN/FD Repeater Standard, CAN-CR100, CAN-CR110/FO, CAN-CR120/HV, CAN-CR200, CAN-CR210/FO, CAN-CR220, CAN-CR300
ISSUE / QUESTION / SYMPTOM
What features do the different repeater versions and variants offer?
POSSIBLE CAUSES / ANSWER
|
Product Order number |
CAN / CAN FD channels | Galvanic isolation | CAN termination resistor | Connector |
|
CAN/FD Repeater Standard 1.01.0211.20000 |
2 x CAN/CAN FD interfaces | Yes (5 kV) | Switchable | 2 x Removable push-in connectors |
|
CAN-CR100 1.01.0210.20000 |
2 x CAN HS (switchable to CAN FD) | Yes | Yes | 2 x Screw terminals |
|
CAN-CR100 1.01.0210.20200 |
2 x CAN HS (switchable to CAN FD) | Yes | No | 2 x Screw terminals |
|
CAN-CR110/FO 1.01.0210.11020 |
2 x CAN HS (switchable to CAN FD) | Yes | Yes | 1 x Screw terminal 1 x Fiber optics (F-SMA) |
|
CAN-CR110/FO 1.01.0210.11220 |
2 x CAN HS (switchable to CAN FD) | Yes | No | 1 x Screw terminal 1 x Fiber optics (F-SMA) |
|
CAN-CR120/HV 1.01.0210.20010 |
2 x CAN HS (switchable to CAN FD) | Yes (3 kV) | Yes | 2 x Screw terminals |
|
CAN-CR120/HV 1.01.0210.20210 |
2 x CAN HS (switchable to CAN FD) | Yes (3 kV) | No | 2 x Screw terminals |
|
CAN-CR200 1.01.0067.44010 |
2 x CAN HS | Yes | Switchable | 2 x D-Sub 9 1 x DIN rail bus |
|
CAN-CR210/FO 1.01.0068.45010 |
2 x CAN HS | Yes | Switchable | 1 x D-Sub 9 1 x Fiber optics (F-SMA) 1 x DIN rail bus |
|
CAN-CR210/FO 1.01.0068.46010 |
2 x CAN HS | Yes | Switchable | 1 x D-Sub 9 1 x Fiber optics (ST) 1 x DIN rail bus |
|
CAN-CR220 1.01.0067.44400 |
2 x CAN HS | Yes (4 kV DC/3,5 kV AC) | Switchable | 2 x D-Sub 9 |
|
CAN-CR220 1.01.0067.44300 |
2 x CAN HS | Yes (4 kV DC/4 kV AC) | Switchable | 2 x D-Sub 9 |
|
CAN-CR300 1.01.0210.40000 |
4 x CAN HS (switchable to CAN FD) | Yes | Yes | 4 x Screw terminals |
|
CAN-CR300 1.01.0210.40200 |
4 x CAN HS (switchable to CAN FD) | Yes | No | 4 x Screw terminals |