canAnalyser3 Mini/Lite/Standard - Comparison of included modules and functions

23 Sep 2024

This article compares the different versions of the canAnalyser in a clear table and thus enables an easy comparison of the respective functions and features.

APPLICABLE PRODUCTS

canAnalyser 3 Standard, canAnalyser 3 Lite, canAnalyser Mini

ISSUE / QUESTION / SYMPTOM

What features and functions do the different versions of the canAnalyser 3 offer? 

 

POSSIBLE CAUSES / ANSWER

Functions Module canAnalyser
Mini
canAnalyser 3
Lite
canAnalyser 3
Standard
Measurement configuration
Supported bus controllers   1 1 64
Number of function modules per bus controller (multi-start)   1 each one module per function unlimited
Transmission
Transmitting messages in layer 2 format via broadcasting lists (one-off/cyclic) Transmit yes (up to 5 predefined messages) yes yes
Transmitting signals based on underlayed databases Signal/Transmit     yes
Transmitting sequences in layer 2 format using simple commands for control Sequencer   yes yes
Reception and display
Receive messages and online display in layer 2 format Receive yes (only scroll view) yes (overwrite and scroll view) yes (overwrite and scroll view)
Filtering during reception Receive   yes yes
Signal reception and interpreted online display based on databases (overwrite/scroll) Signal   up to 5 signals yes
Graphical display of received signals over the time axis Signal   up to 5 signals yes
Display of statistical values (e.g. bus load, number of error frames) Signal   yes yes
Logging of value range overflows Signal   yes yes
Graphical display of frequency distribution of received messages Histogram   yes yes
Recording/Playback
Recording on hard disk for later analysis Trace yes (max. 1 GB) yes (no limitation) yes (no limitation)
Filter and trigger functions during recording Trace   yes yes
Recording on hard disk for later analysis, including filter and trigger functions Trace   yes yes
Playback of recordings on the buses and/or modules for analyzing Replay   yes yes
Adaptation and Extension
Development of measurement/analysis functions using C# and Visual-Basic .NET scripts Scripting/Host   yes yes
Open interface for expansion by customer-specific modules (.NET modules) customized   yes yes
Protocol Interpreter
Display of CANopen messages according to CANopen specification CANopen   contained contained
Display of SAE J1939 messages according to SAE J1939 specification J1939   contained contained