Special translators for all major air-conditioning manufacturers, enabling them to get connected to any building network such as KNX, BACnet, Modbus, and Home Automation.
Bosch to Modbus TCP/RTU - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
Industrial Firewall for NAT and Network Segmentation
Powerful industrial security appliance engineered to provide unparalleled protection for operational technology (OT) networks. Featuring a robust combination of Network Address Translation (NAT), Routing, and advanced stateful firewall features it’s ideal for network segmentation use-cases in industrial environments following IEC/ISA 62443-3-3 guidelines.
Bosch to KNX - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 64 indoor units from a single interface.
Daikin to BACnet MS/TP - 1 indoor unit
The Daikin-BACnet interface allows full bidirectional communication between Daikin VRV and Sky Air Conditioner units and BACnet MS/TP networks. The interface enables BACnet communication via polling or subscription requests (COV), making the indoor unit available through independent BACnet objects. A wired remote controller can also be connected.
Configurable automotive platform (4 x CAN + 4 x CAN FD, 2 x CAN LS)
The Ixxat FRC-EP190 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based applications. Featuring LIN and eight CAN channels, thereof four CAN FD and two CAN low-speed capable, it's ideal for logging, gateway and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Bosch to Home Automation - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to Modbus TCP/RTU - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to Home Automation - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a Home Automation system. The solution allows the integration of up to 16 indoor units from a single interface.
Bosch to BACnet/IP & MS/TP - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.
Bosch to KNX - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to BACnet/IP & MS/TP - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Daikin to Modbus RTU Interface - 1 indoor unit
The Daikin-Modbus interface allows full bidirectional communication between Daikin VRV systems and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit.
Configurable automotive platform (1 x EtherCAT, 4 x CAN, 4 x CAN FD)
The Ixxat CANnector LE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN and up to eight CAN channels, four of which are CAN FD capable, including Industrial Ethernet support – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Bosch to KNX - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 16 indoor units from a single interface.
Bosch to Home Automation - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Bosch to Modbus TCP/RTU - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Bosch to BACnet/IP & MS/TP - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.
All-in-one set with USB-to-CAN interface and useful accessories
The Ixxat USB-to-CAN V2 Starter Kit offers a ready-to-go solution for connecting CAN networks to computers, perfect for getting started with CAN applications. This kit includes the USB-to-CAN V2 professional interface, two RJ45 to Sub-D9 adapter cables, a ribbon cable with four D-Sub 9 connectors, two termination resistors, and a gender changer for a quick and easy setup right out of the box.