Power up your network! PoE injectors deliver power and data over a single Ethernet cable, simplifying installations. PoE splitters enable non-PoE devices to use PoE networks, extending reach and reducing cable clutter.
Anybus Wireless Bolt CAN Starter kit black includes 2 Wireless Bolt CAN devices (Black), power supplies, and cables. It provides wireless communication for CAN networks with support for various baud rates and both Wi-Fi and Bluetooth connectivity.
Starter kit for wireless CAN communication
The Anybus Communicator Configuration Cable makes it easy to connect your PC to an Anybus Communicator Classic. Use it to quickly set up and adjust your device.
Easily configure Anybus Communicators with serial cable
The Anybus CompactCom 40 Brick Modbus Serial Interface is a communication interface that can be embedded into any serial device or machine to enable communication to EtherNet/IP networks. The pluggable design enables integration late in the assembly process, the addition of specific network connectors, and compliance with protection class requirements.
Enable communication between industrial devices and Ethernet/IP networks
The Graphite Strain Gage Input Module is a full featured single loop PID control for your Graphite® products. Accepts low level signals from a variety of bridge-type transducers, plus a second signal input that provides math capabilities between two input channels. With relay outputs and an analog output, the GMSG module can perform virtually any combination of time-proportioning or linear control.
Reliable, versatile PID control module with strain gage input for Graphite® products
The E3 I/O module streamlines networks with high-performing and flexible Ethernet connectivity. Sixteen isolated discrete 10-30 VDC/VAC input channels. Fast redundancy, password security, diagnostics and rugged design ensure reliable performance and reduced downtime in remote and extreme settings.
Powerful networking with reliable remote monitoring and control capabilities
The CUB®5 Miniature RTD Panel Meter with Backlight Display is compact and powerful to help you stay on top of industrial measurements. Simple to install and easy to read. Designed with flexibility in mind. Simply upgrade your meter with field-installable option cards when you need new communication and setpoint capability.
A compact and reliable panel meter that evolves as your needs change
The PXU 1/16 DIN, AC Power, 0 to 10 VOC, Remote Setpoint and 1 User Input, RS-485 PID Controller is simple to program with a large, easy to read display that’s easy to mount in small areas. Dependable operation in industrial environments. Give your operation full confidence with industry-leading PID control for a range of applications.
A PID controller for basic needs with universal input capability
The PXU 1/16 DIN, AC Power, 0 to 10 VOC, Retransmitted Output, 1 User Input, RS-485 PID Controller is simple to program with a large, easy to read display that’s easy to mount in small areas. Dependable operation in industrial environments. Give your operation full confidence with industry-leading PID control for a range of applications.
A PID controller for basic needs with universal input capability
The PXU 1/16 DIN, AC Power, 0 to 10 VOC, Relay, 2 User Inputs, RS-485 PID Controller is simple to program with a large, easy to read display that’s easy to mount in small areas. Dependable operation in industrial environments. Give your operation full confidence with industry-leading PID control for a range of applications.
A PID controller for basic needs with universal input capability
The CANopen® option card is a powerful and convenient addition for users of the Data Station Plus and Enhanced Modular Controller. Configured seamlessly using Crimson® Software (Version 2.0 or later), this card provides a digitally isolated CANopen port, ensuring robust and reliable communication with virtually any CANopen-compliant device. Its easy installation process allows for quick integration, expanding the connectivity capabilities of your existing Red Lion platform.
The PXU 1/16 DIN, AC Power, 0 to 10 VOC, CT and 1 User Input, RS-485 PID Controller is simple to program with a large, easy to read display that’s easy to mount in small areas. Dependable operation in industrial environments. Give your operation full confidence with industry-leading PID control for a range of applications.
A PID controller for basic needs with universal input capability
The Graphite Expansion Rack Standard (3-Slot) easily panel mounts to the Graphite Wide Expansion Rack via a direct connector for power and communication. Each standard rack provides 3 additional module slots, allowing expansion of Red Lion's Graphite® platform I/O and communication capabilities without extensive wiring. Up to three standard racks can be linked to a single wide rack, supporting a total of twenty modules per Graphite HMI/controller connection for scalable industrial process connectivity.
The Graphite RTD analog input module easily connects any device or sensor to Graphite HMIs and can be used in conjunction with any Graphite modules. This high density temperature input module provides up to six isolated inputs. Ideal for data acquisition applications.
Monitor and control remote devices easily and intuitively with Graphite® data acquisition modules.
The Graphite single PID module provides dedicated single loop PID control for your Graphite® products. Configure and integrate high-density multi-zone systems in minutes with drag-and-drop programming. Stay in control with universal input capability, 3 relay outputs and a heater current monitor to detect heater-related issues.
Reliable, versatile PID control module with heater monitoring for Graphite® products
The Antenna Wi-Fi 4" RPSMA is a 2.4GHz hinged dipole antenna designed to enhance the wireless range and signal strength of 802.11 b/g/n Wi-Fi networks. It features a durable TPE housing and a hinged design with an 84.4mm length for optimal positioning. The RP-SMA(M) connector ensures easy and secure installation on compatible devices.
The iPC-I XC16/PCI is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
Designed for the integration of any BACnet MS/TP or BACnet/IP server device with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aimed to make BACnet objects, data, and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa. Please refer to the new product reference for further details.
Replaced by: IN7004853K00000
The Antenna LTE MIMO/GPS/WiFi is a tri-band MIMO dome antenna providing comprehensive connectivity: dual 4G LTE/3G/2G (698-3500MHz), dual-band 2.4/5GHz WiFi, and GPS/GLONASS positioning. It enhances cellular, WiFi, and location performance. Includes 2x9ft CFD-200 cables with SMA(M) connectors for LTE, 1x9ft CFD-200 cable with RP-SMA(M) for WiFi, and 1x9ft RG174 cable with SMA(M) for GPS. Its IP67 waterproof rating ensures reliable outdoor operation.
