Take full command of your industrial network with our comprehensive range of managed Ethernet switches. Designed for rugged industrial environments, these switches deliver dependable performance while giving you the tools to customize port configurations and Ethernet speed, optimize traffic flow, monitor operations remotely, provide access control, and diagnose critical issues in real time.
The Anybus Modbus RTU to TCP Gateway enables you to connect any Modbus RTU device to Modbus TCP control systems. The gateway works as a translator (router) between the two networks allowing up to 32 Modbus RTU devices to be connected to a Modbus-TCP network.
A protocol converter that connects Modbus RTU devices to Modbus TCP control systems
The Anybus X-gateway Lonworks Slave to PROFIBUS Slave enables you to connect any Lonworks system to any PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Lonworks and PROFIBUS control systems
Combination Antenna 4G/3G & GPS - Hole Mounted
Combination Antenna 4G/3G & GPS - Hole Mounted for Ewon Netbiter
The blank extension front plate should be used if no extension card is inserted inside the extention cards slot of any Ewon Flexy devices.
Slot filler to replace Ewon Flexy extension card
The Ewon Cosy 131 gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secure industrial cloud service. The Ewon Cosy 131 makes industrial remote access easy and secure like never before!
Industrial VPN gateway for secure machine remote access
The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!
Industrial VPN gateway for secure remote access to machines
The durable 2ZR6AA-500- 500' Multimode Duplex Fiber Optic Cable with ST-ST connectors help add fiber capability to industrial applications. 500 feet in length, diameter of 62.5/125, wavelength of 1310nm, and maximum insertion loss of 0.4dB. Safety rated and high performing in harsh conditions from -20 to 70 °C.
The Ixxat Mobilizer DIN Rail Mount is a useful accessory for the Ixxat Mobilizer Series, enabling secure installation of the device on standard 35 mm grounded DIN rails. Made of aluminum and supplied with four screws, the mount is attached to the device and snapped into place on the rail for quick and stable installation.
Accessory for Ixxat Mobilizer
The CBL AB PLC-5 V CHNL 0 is a 10-foot communication cable designed to establish a connection between Graphite®, DSP, G3, or Modular Controller series devices and an Allen Bradley PLC-5 programmable logic controller via its Channel 0 port. Facilitates seamless data exchange and communication between these industrial control components.
The Ixxat D-Sub 9 connector with switchable termination resistor offers a simple and flexible solution to connect CAN interfaces to CAN networks. With the terminating resistor switched on, the connector can be used to terminate the bus at the end node. With the terminating resistor switched off and a looped cable, participants can be easily integrated into the bus, whereby the stub line is kept to a minimum. The plug also offers the option of connecting two cables simultaneously.
Connects CAN/CAN FD components (D-Sub 9 plug)
These label kits provide a unique way to identify your display with one of 189 different engineering units. The label lights up from inside the PAX or PAX Lite Meters where it is protected from washdown and dirty environments
Standard Connectors are for use with the Standard Quick Disconnect TC Probes. They are available in both male and female termination, and include a “write on label” for easy identification. The female standard connector is a universal connector, meaning it can be used to terminate male versions of both the standard and miniature connector.
Adapts existing G310 Graphite HMI panel cutouts for G09 Graphite® panel mounting. The finish is durable silver o match Graphite panels. The face only is NEMA 4X/IP65.
30A Solid State Relay with integrated heat sink. Single phase output, 48-660 VAC switching. 4-32 VDC control, zero voltage turn-on. DIN rail or panel mount. LED "ON" indicator, cage clamp terminations for easy wiring. Reliable solid-state switching
The In-Line Amplifier for Magnetic Pickups is engineered for reliability over long cable runs, this sensor features a current sinking output and ultra-low threshold speeds, making it ideal for precision applications. Its design supports larger air gaps and offers exceptional noise immunity, ensuring stable performance even in electrically noisy environments.
This card is for our isolated sinking NPN transistors. The solated sinking NPN transistore, 100 mA max. This is for PAX units only
The CAT5E-RM12-5 Shielded 5' Cable is a durable, high performing 5-foot twisted pair cable with 90° M12 to bare end. Meets and exceeds Cat5E specifications. Perfect for high temperature settings with cable rated for 75° C. Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX connections.
The CBL MIT A/Q is a 10-foot communication cable designed to connect Graphite®, DSP, G3, or Modular Controller series devices to either a Mitsubishi A Series PLC via the A1SJ71C24-R2 Module or a Mitsubishi Q Series PLC via the QJ71C24 module. Facilitates seamless data exchange and communication with both legacy and current Mitsubishi PLC platforms.
