Gateway configuration software
Configure Anybus, Ixxat and Intesis gateways, enabling communication between devices and networks.
HMS software and tools for industrial data visualization, remote management, configuration, analysis and more. HMS also offers protocol stacks and APIs for fast and easy implementation of fieldbus and safety protocols.
DALI-2 to KNX - 1 DALI channel
The Intesis DALI-2 to KNX TP PRO Gateway is a multi-master application controller for DALI-2 ballast integration into a KNX system. It enables standard switching/dimming, color control, emergency lighting management, and operating hours recording, with error analysis for interoperability in building automation setups.
BACnet/IP & MS/TP to ASCII IP & Serial - 600 points
Integrate any BACnet MS/TP or BACnet/IP server device with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aims to make BACnet objects, data, and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa.
KNX to Modbus TCP & RTU - 250 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
DALI to Modbus TCP & RTU - 1 DALI channel
Integrate any DALI/DALI-2 driver and DALI-2 light sensor or occupancy sensor with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
PROFINET to BACnet/IP & MS/TP - 1200 points
The Intesis BACnet-PROFINET gateway allows you to seamlessly interconnect PLC/BMS systems and their connected devices between BACnet/IP and MS/TP control systems and PROFINET networks. The gateway works as a BACnet server on the BACnet side and as a PROFINET I/O device on the PROFINET side and is configured via the Intesis MAPS configuration tool.
KNX to ASCII IP & ASCII Serial - 3000 points
Integrate any KNX device or installation with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aims to make KNX communication objects and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa.
KNX to ASCII IP & ASCII Serial - 100 points
Integrate any KNX device or installation with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aims to make KNX communication objects and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa.
Evaluate the CompactCom Module and its API before starting your integration
This adapter board gives an Anybus CompactCom Module the possibility to connect to the STM3240G-EVAL board. On this interface, the serial (UART), SPI, 8-bit parallel, and 16-bit parallel host communication interfaces are available. Please note, Anybus CompactCom Modules must be ordered separately.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
A software based tool for testing PROFIBUS-DPV1 functionality effortlessly
The Anybus PROFIBUS-DPV1 Master Simulator enables you to set up and test slaves/adapters on PROFIBUS-DPV1 without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
A protocol converter that connects PROFIBUS devices to DeviceNet PLCs
The Anybus X-gateway PROFIBUS Master to DeviceNet Adapter enables you to connect any PROFIBUS device or equipment to DeviceNet control systems. It can be used when there is no existing PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Web-based management control system for your building management system.
i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.
A protocol converter that connects CAN devices to PROFINET-IO control systems.
The Anybus Communicator – CAN to PROFINET-IO converts CAN protocols to PROFINET-IO, enabling you to connect any CAN-based device or equipment to PROFINET-IO control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Common Industrial Protocol (CIP) Safety protocol stack
The Ixxat Common Industrial Protocol (CIP) Safety development license enables the implementation of CIP Safety Originator devices on EtherNet/IP. It is an advanced solution for reliable and secure communication in industrial environments. This variant includes 10 initial royalties, with the option to purchase more upon consumption (including 12 months updates and maintenance).
A protocol converter that connects POWERLINK and POWERLINK control systems
The Anybus X-gateway POWERLINK Device to POWERLINK Device enables you to connect any POWERLINK system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.