The Intesis 700 Series Air gateways are centralized gateways that enable bidirectional communications among the Bosch AC Air Flux series and Mini VRF (MCDI) units and control systems based on BACnet, KNX, Modbus, or Home Automation.
With just one IN770AIR connected to the XY terminals of Bosch’s XYE communication network, you can effortlessly control and monitor up to 64 indoor units independently. Experience unparalleled efficiency and convenience in managing your climate control systems with Intesis!
Three available licenses allow you to choose the product that best suits the size of your project:
Order Code | License | Capacity |
IN770AIRXXSO000 | XXS | Up to 4 indoor units |
IN770AIR00SO000 | Small | Up to 16 indoor units |
IN770AIR00MO000 | Medium | Up to 64 indoor units |
The above Intesis models replace the previous generation as follows:
Legacy Order Code, capacity and protocol | Replacement Order Code |
INMBSACA004I000, up to 4 indoor units. Modbus | IN770AIRXXSO000 |
INBACACA004I000, up to 4 indoor units. BACnet | IN770AIRXXSO000 |
INMBSACA008I000, up to 8 indoor units. Modbus | IN770AIR00SO000 |
INKNXACA016I000, up to 16 indoor units. KNX | IN770AIR00S0000 |
INMBSACA032I000, up to 32 indoor units. Modbus | IN770AIR00MO000 |
INKNXACA064I000, up to 64 indoor units. KNX | IN770AIR00MO000 |
The Intesis 700 Air series gateways are configured using the powerful Intesis MAPS configuration and diagnostics tool. Once the IN770AIR gateway is connected to the Bosch XYE bus, the Intesis MAPS scanning function detects the connected Bosch indoor units as well as their control signals.
Connect up to 3 energy meters to the 700 Air series and, thanks to its Power Estimation algorithm, obtain information on the estimated consumption of each indoor unit in the VRV installation. This algorithm provides valuable information for decision-making when designing energy-saving strategies.
Not sure which Intesis gateway is compatible with your Bosch HVAC?
Check the indoor or outdoor unit reference in the online HVAC compatibility tool. Type the AC model and select the Intesis gateway fitting your project’s building automation protocol. If you have any doubts, create an account and use the inquiry form, and one of our expert engineers will gladly assist you.