AWB1500-B, Anybus Wireless Bolt LTE  EMEA - Black versionAWB1500-BThe Anybus Wireless Bolt LTE EMEA - Black is an industrial-grade router designed to provide high-speed transparent internet access to both stationary and mobile industrial machines., Low total cost of ownership Secure LTE connectivity with 3G fallback Fast data transfer Compatible with any TCP or UDP-based protocol Thanks to the integrated design of the antenna and communication module, there's no need for additional antenna or accessory purchases. , Transparently transfer data across any TCP or UDP-based protocol, including MQTT and OPC UA. lte, Anybus Wireless Bolt LTE  EMEA - Black version

APPLICABLE PRODUCTS Anybus Wireless Bridge II - Ethernet (AWB3000 and AWB3010)  Anybus Wireless Bolt - Ethernet RJ45 PoE (AWB2030)  Anybus Wireless Bolt LTE (AWB1500)  Anybus Wireless Bolt IoT (AWB1000)  Anybus Wireless Bolt Serial (AWB2010)  Anybus Wireless Bolt CAN (AWB2020)  ISSUE IPConfig does not find Wireless Bolt or Bridge   POSSIBLE CAUSES Make sure the latest version of IPConfig is installed: The latest version can be download here or from https://www.anybus.com/support.  , Make sure the utility is scanning the correct adapter/interface: Select the gear icon in the upper right-hand corner: A specific interface to scan with or all interfaces can be selected: When the Bolt/Bridge is found, it can be selected to change its IP configuration, if necessary, so that the web interface can be reached.  , Verify that the Bolt is powered on and the LEDs are lit up (these can be seen through the reset hole on the bottom of the Bolt)., In the Network Adapters list, other active adapters can be temporarily disabled (including WiFi): If the problem persists, the Bolt should be reset to it's default settings., The web interface should now be manually accessible using a browser., IPConfig doesn't find Wireless Bolt or Bridge

Anybus ® Wireless Bolt LTE TM AWB1500 or AWB1501 To connect to 4G cellular network., To s u p p l y B o l t LTE and Bolt Ethernet RJ45 with power, we have connected a Ethernet Power Injector between the Bolt's and the Flexy 205., Connect the Devices A.Ewon Flexy 205 B.Anybus PoE Injector 12-57VDC C.Anybus Bolt LTE D.Anybus Bolt RJ45 PoE Figure 3., a.Enter the Bolt LTE IP address in your web browser and click Enter., b .Loginto the Bolt LTE built-in web interface., Application Note - Connect Flexy 205 to Internet via Bolt LTE/Bolt Ethernet RJ45 PoE

See Bolt LTE Built-In Web Interface (page 19)., Save and Reboot button and Cancel All Changes button Bolt LTE Built-In Web Interface Anybus ® Wireless Bolt LTE ™ SP2868 Version 1.4 Page 19 of 28 5.4., Setting Up Bolt LT E with Automatic APN Assignment Before You Begin By default, the Bolt LTE APN Assignment is set to automatically search for the SIM card APN setting and assign it to the Bolt LTE., Te c h n i cal Specifications Order code EMEA: AWB1500 Americas: AWB1502 Japan: AWB1504 EMEA: AWB1501 Americas: AWB1503 Japan: AWB1505 Color Black White top and black base Operating temperature Shadow: -40 to +65 °C Direct sunlight: -40 to +45 °C Shadow: -40 to +65 °C Direct sunlight: -40 to +65 °C Storage temperature -40 to +85 °C Host interface RJ45 Ethernet 10/100 Mbit/s, PoE Humidity EN 600068-2-78: Damp heat, +40 °C, 90% (non-condensing) Vibration Refer to datasheet at www.anybus.com., •Worst case peak current: 1.2A@11VDC Dimensions Diameter: 68 mm Height: 75 mm without power connector, 84 mm incl. power connector Height above mounting surface: 41 mm Weight 100 g Housing material Plastic (see data sheet for details) Protection class Top (outside of host): IP66 and IP67 / UL Type 4X Base (inside of host): IP21 Mounting M50 screw and nut (50.5 mm hole needed) Maximum data speeds Max download speed: 100 Mbit/s Max upload speed: 50 Mbit/s Technical Data Anybus ® Wireless Bolt LTE ™ SP2868 Version 1.4 Page 25 of 28 Order code EMEA: AWB1500 Americas: AWB1502 Japan: AWB1504 EMEA: AWB1501 Americas: AWB1503 Japan: AWB1505 Cellular standards EMEA: LTE B1, B3, B7, B8, B20, B28, Fallback 3G Americas: LTE B2, B4, B5, B12, B13, B14, B25, B26, B66, Fallback 3G Japan: LTE B1, B3, B4, B8, B11, B18, B19, Fallback 3G Ethernet protocols Transparent transfer of any TCP/UDP based protocol, Built-in firewall, NAT and DHCP server Positioning standards and functions, Startup Guide - Anybus Wireless Bolt LTE

Login to the Built-In Web Interface The Bolt LTE built-in web interface can be accessed from a standard web browser., B efore Yo u B e g i n I M P O R TANT Before installing the Bolt LTE on a network, change the Bolt LTE default username and password., Procedure Login to the Bolt LTE built-in web interface: 1.Openaweb browser. 2 .Clickto select the Address bar and enter and the Bolt LTE IP address., Reset button The Reset button is located on the bottom of the Bolt LTE., Te c h n i cal Specifications Order code EMEA: AWB1500 Americas: AWB1502 Japan: AWB1504 EMEA: AWB1501 Americas: AWB1503 Japan: AWB1505 Color Black White top and black base Operating temperature Shadow: -40 to +65 °C Direct sunlight: -40 to +45 °C Shadow: -40 to +65 °C Direct sunlight: -40 to +65 °C Storage temperature -40 to +85 °C Host interface RJ45 Ethernet 10/100 Mbit/s, PoE Humidity EN 600068-2-78: Damp heat, +40 °C, 90% (non-condensing) Vibration Refer to datasheet at www.anybus.com., User Manual - Anybus Wireless Bolt LTE