USB-to-CAN series
Ideal for CAN configuration and analysis applications, but also for control. Use on a desktop PC as well as mobile in the field or workshop.
Ixxat PC interfaces enable flexible access to CAN or LIN based networks from a PC — for development, commissioning, maintenance, control and monitoring. Available for all common PC interface standards and form factors.
Powerful networking with reliable remote monitoring and control capabilities
The E3 I/O module streamlines networks with high-performing and flexible Ethernet connectivity. Ten RTD analog inputs to measure temperature. Fast redundancy, password security, diagnostics and rugged design ensure reliable performance and reduced downtime in remote and extreme settings.
PC interface card for CAN (2 x CAN), galv. isolated
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Piggyback module for CAN interface cards
The MultiCAN expansion board for the Ixxat CAN-IB series enhances the card's capabilities by providing two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available high-speed CAN channels on a D-Sub 9 connector and reduces slot requirements, making it ideal for expanding CAN networks efficiently.
PC interface card for CAN (1 x CAN), galv. isolated
The Ixxat CAN-IB400/PCI is an active PCI interface card with one CAN channel and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
The 316TX Industrial Ethernet Switch with Monitoring is a 16-port managed switch featuring N-View™ Monitoring Technology and 10/100BaseTX RJ-45 ports with autosensing capabilities. For replacement options, please see the NT116, 716TX, or the NT-5016-000-0000.
The 317FX Industrial Ethernet Switch with Monitoring, SC 2km, is a 17-port managed switch featuring N-View™ Monitoring Technology, sixteen 10/100BaseTX RJ-45 ports, and one 100BaseFX multimode fiber port with an SC connector. For replacement options, please see the NT-5018-DM2-0000 or the NT-5018-FX2-SC00.
LG to KNX - 1 indoor unit
The LG-KNX interface allows full bidirectional communication between LG VRF systems and KNX installations. It has four potential-free binary inputs to integrate external devices (such as window contacts or presence detectors), with the corresponding internal functions available to help improve energy efficiency.
Replaced by: INWFIFGL001I100
The AC Cloud Control device for Fujitsu allowed a complete and natural integration of Fujitsu RAC and VRF systems into the AC Cloud Control system, using a direct connection via the CN port for professional HVAC control and monitoring through a native Android/iOS app or a web dashboard. Please refer to the new product reference for further details.
Replaced by: INWFIPAN001R100
The AC Cloud Control device for Panasonic allowed a complete and natural integration of ECOi and PACi systems into the AC Cloud Control for professional HVAC control and monitoring through a native Android/iOS app or a web dashboard. Please refer to the new product reference for further details.
Haier to KNX - 16 indoor units
The Haier-KNX gateway allows bidirectional communication between Haier Commercial and VRF systems and KNX installations. This communication brings total control of the AC unit from KNX, including monitoring of the AC unit’s internal variables, running hours counter (for filter maintenance control), and error codes.
Replaced by: IN771PAN00LO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allowed the integration of up to 128 indoor units from a single interface. Please refer to the new product reference for further details.
Provides simple, robust networking with Gigabit speed and low power consumption.
The Anybus Unmanaged L2 Switch creates simple and robust data networks in harsh industrial settings. With Gigabit throughput and ultra-low power consumption, it’s ideal for small networks where reliable and basic connectivity meets application requirements.
Samsung to Modbus TCP/RTU - Up to 4 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Central Plant-Floor Network Security Management
The Anybus Cybersecurity Console (ACC) provides users with a single pane of glass to view and manage as many or as few Anybus Defenders as desired.Fleet management of rules, rulesets, users, user groups, devices, device groups and aliases can be completed simply and quickly by creating collections of configuration options that can be quickly deployed to a system without a loss of production or requiring system downtime.
Industrial Security Appliance with Industrial Protocol Screening and Asset Access Control
Advanced industrial security appliance engineered to provide unparalleled protection for operational technology (OT) networks. Featuring a robust combination of NAT, Routing as well as Deep Packet Inspection (DPI) on common industrial protocols and Intrusion Detection it serves as a cornerstone for safeguarding both manufacturing and critical infrastructure against a myriad of cyberthreats.
10Gb copper SFP+ RJ45 for Anybus Defender Product Range
Verified SFP+ Transceiver — fully compatible with Anybus Defender 8000 Series
Web-based management control system for your building management system.
i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.
Web-based management control system for your building management system.
i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.
