USB-to-CAN series
Ideal for CAN configuration and analysis applications, but also for control. Use on a desktop PC as well as mobile in the field or workshop.
Ixxat PC interfaces enable flexible access to CAN or Industrial Ethernet networks from a PC — for development, commissioning, maintenance, control and monitoring. Available for all common PC interface standards and form factors.
Replaced by: IN770AIR00SO000
This Hisense application was designed to allow bidirectional control and monitoring of Hisense VRF systems from a KNX installation. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
The PC-I 04/PCI is a passive PCI interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks.
Remote communication gateway exchanging data over Cellular 4G or Ethernet to the Netbiter Argos IIoT platform
Ewon Netbiter enables you to remotely monitor and control field equipment - from anywhere. With this rugged gateway connected to the cloud solution Argos, remote installations can be monitored and controlled online 24/7.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
A software based tool for testing PROFIBUS functionality effortlessly
The Anybus PROFIBUS Master Simulator enables you to set up and test slaves/adapters on PROFIBUS without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
A protocol converter that connects Interbus CU and OPC UA-MQTT control systems
The Anybus X-gateway Interbus CU to OPC UA-MQTT enables you to connect any Interbus CU system to any OPC UA-MQTT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects serial devices to EtherCAT control systems
The Anybus Communicator Serial Master to EtherCAT enables you to connect any RS-232/485 device or equipment to EtherCAT control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
Replaced by: IN770AIR00MO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
The Ixxat USB-to-CAN II is a USB PC interface with two CAN channels. It is used to connect PCs and applications with CAN-based networks.
With Anybus NetTool for DeviceNet, the configuration software for DeviceNet, you can define the DeviceNet configuration for your device. It’s downloaded to the module via the HMS configuration software NetTool-DN or Rockwell´s RSNetWorx. NetTool-DN can be connected via a configuration port on the module, from DeviceNet or the application interface.
M-BUS to BACnet/IP & MS/TP - 60 devices
Integrate any M-Bus device with a BACnet BMS or any BACnet IP or BACnet MS/TP controller. This integration aims to make M-Bus devices, their registers, and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
A protocol converter that connects PROFINET IO and EtherNet/IP control systems
The Anybus Communicator PROFINET IO Device to EtherNet/IP adapter enables you to connect any PROFINET IO control system to any EtherNet/IP control system. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
The Industrial Ethernet Module is a compact PCB with two channels which enables the easy and fast implementation of various industrial Ethernet protocols into customer specific applications.
A protocol converter that connects DeviceNet and Modbus TCP control systems
The Anybus X-gateway DeviceNet Adapter to Modbus TCP Server enables you to connect any DeviceNet control system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Replaced by: IN770AIR00MO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
A protocol converter that connects CANopen and PROFINET-IRT control systems
The Anybus X-gateway CANopen Slave to PROFINET-IRT Device enables you to connect any CANopen system to any PROFINET-IRT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects ControlNet and Modbus RTU control systems
The Anybus X-gateway ControlNet Adapter to Modbus RTU Slave enables you to connect any ControlNet system to any Modbus RTU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
