Hitachi Air to Water to KNX Interface
Hitachi to KNX - 1 AW unit
Item number: INKNXHIT001A000
The Hitachi-KNX interface allows full bi-directional communication between Hitachi Air-to-Water systems and KNX installations.
Software for industrial data visualization, remote management, configuration tools and more.
Hitachi to KNX - 1 AW unit
The Hitachi-KNX interface allows full bi-directional communication between Hitachi Air-to-Water systems and KNX installations.
A weather resistant 4 channel repeater
The Anybus A5 is designed for simple network segmentation in harsher environments with its IP 65 classification
Durable and high-performing 9-port managed Ethernet switch for industrial connectivity
The N -Tron® 9-port Managed Industrial Ethernet Switch is a powerful and durable solution to connect Ethernet-enabled equipment. Best-in-class network management features for remote monitoring and configuration control. High performance, reliability and noise immunity for rugged industrial applications. Eight copper 10/100 ports + one 100Base 80km, singlemode fiber port with SC connector.
A protocol converter that connects serial devices to DeviceNet control systems.
The Anybus Communicator – Serial Master to DeviceNet converts serial protocols to DeviceNet, enabling you to connect any RS-232/485 device or equipment to DeviceNet control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Provides simple, robust networking with Gigabit speed and low power consumption.
The Anybus Unmanaged L2 Switch creates simple and robust data networks in harsh industrial settings. With Gigabit throughput and ultra-low power consumption, it’s ideal for small networks where reliable and basic connectivity meets application requirements.
A protocol converter that connects EtherNet/IP devices to PROFINET-IO PLCs
The Anybus X-gateway EtherNet/IP Master to PROFINET-IO Device enables you to connect any EtherNet/IP device or equipment to PROFINET-IO control systems. It can be used when there is no existing EtherNet/IP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable communication between industrial devices and EtherCAT networks
The Anybus CompactCom 40 Brick Mini EtherCAT is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherCAT networks. Soldered directly onto the host’s carrier board and delivered in a tape-and-reel format, it’s ideal for automated manufacturing and high-volume production.
Unmanaged 5-port industrial Ethernet switch with copper and fiber connectivity
The N-Tron® Unmanaged 5-port Industrial Ethernet Switch meets data gathering, control and Ethernet I/O needs cost-effectively. This plug-and-play hubswitch has four 10/100BaseTX RJ-45 ports and one 2km 100BaseFX multimode fiber port with SC connector in a compact, durable metal case with metal DIN rail clip. Top performance for high-speed layer 2 switching in demanding industrial environments.
Communicate securely across your network with fast performance and versatile connectivity.
The N-Tron® NT24k 12-Port Managed Gigabit Industrial Ethernet Switch is one of the easiest to deploy Ethernet switches in the industry. Simplified use, uncompromised performance and multiple configurations to fit your automation and industrial needs. Eight copper 10/100/1000BaseTX ports and four 100BaseFX 80km, singlemode fiber ports with SC connectors.
Piggyback module for CAN interface cards
The MultiCAN expansion board for the Ixxat CAN-IB series enhances the card's capabilities by providing two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available high-speed CAN channels on a D-Sub 9 connector and reduces slot requirements, making it ideal for expanding CAN networks efficiently.
BACnet/IP & MS/TP to KNX - 1200 points
Integrate any BACnet MS/TP or BACnet/IP server device with any KNX device or system. This integration aims to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
An Ethernet switch with pre-configured Real-Time Ring™
The Sixnet® 6-port Managed Industrial Ethernet Switch features powerful Real-Time-Ring™ technology with high-speed, fault-tolerant network redundancy and prioritized message delivery for critical industrial applications. Pre-configured out of the box to save you time and money. Four 10/100BaseTX RJ-45 ports + two 100BaseFX singlemode 60km fibers ports with ST connectors.
PC interface card for CAN (1 x CAN), galv. isolated
The Ixxat CAN-IB400/PCI is an active PCI interface card with one CAN channel and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Replaced by: IN770AIR00MO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
A pocket size tool for speeding up the assembly of a PROFINET cable.
The PROFINET Cable Striping Tool removes the sheath and exposes the shielding with the exact length for the required plugs. No cable is wasted and it eliminates other tools.
High-performing 12-port managed Ethernet switch for industrial connectivity with Gigabit uplink ports
The N-Tron® 12-port Managed HV Industrial Ethernet Switch helps you deploy and manage network and remote monitoring features through a web browser, including auto IGMP configuration, diagnostics and ring configuration. Durable metal casing makes it ideal for harsh and remote sites. Eight copper 10/100 ports + 2 built-in 100Base 2km, multimode fiber ports with SC connectors + 2 optional gigabit SFP ports.
Plug-and-play 8-port unmanaged Ethernet switch for real-time operation
The Sixnet® 8-port Unmanaged Industrial Ethernet Switch is plug and play to help you save time and reduce costs. Ruggedized, hardened design is engineered to last and offers superior performance in harsh industrial settings. Get fast, reliable connectivity for your applications through five 10/100BaseTX RJ-45 ports and three 100BaseFX multimode 4km fiber port with ST connectors.
A protocol converter that connects EtherNet/IP devices to ControlNet PLCs
The Anybus X-gateway EtherNet/IP Master to ControlNet Adapter enables you to connect any EtherNet/IP device or equipment to ControlNet control systems. It can be used when there is no existing EtherNet/IP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.