
Hitachi Air to Water to KNX Interface
Hitachi to KNX - 1 AW unit
Item number: INKNXHIT001A000
The Hitachi-KNX interface allows full bi-directional communication between Hitachi Air-to-Water systems and KNX installations.
Software for industrial data visualization, remote management, configuration tools and more.
Hitachi to KNX - 1 AW unit
The Hitachi-KNX interface allows full bi-directional communication between Hitachi Air-to-Water systems and KNX installations.
Configurable automotive platform (4 x CAN)
The Ixxat FRC-EP170 CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and up to four CAN channels, one of which is CAN low-speed capable, it is ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
DALI-2 to KNX - 1 DALI channel
The Intesis DALI-2 to KNX TP PRO Gateway is a multi-master application controller for DALI-2 ballast integration into a KNX system. It enables standard switching/dimming, color control, emergency lighting management, and operating hours recording, with error analysis for interoperability in building automation setups.
A protocol converter that connects serial devices to Modbus TCP control systems
The Anybus Communicator Serial Master to Modbus TCP enables you to connect any RS-232/485 device or equipment to Modbus TCP control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A protocol converter that connects EtherNet/IP and Modbus Plus control systems
The Anybus X-gateway EtherNet/IP Adapter to Modbus Plus Slave enables you to connect any EtherNet/IP system to any Modbus Plus control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects FIPIO and Lonworks control systems
The Anybus X-gateway FIPIO Slave to Lonworks Slave enables you to connect any FIPIO system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Specially designed for easy mounting for all CompactCom modules
The Anybus CompactCom is designed to use a compact flash connector as application connector. HMS offers a host connector, that is designed to simplify the mounting and to meet the demands for a secure and stable connection of the Anybus CompactCom modules (with or without housing).
Replaced by: IN775FGL00SO000
This Fujitsu application was designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a KNX installation. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Serial connection cable for Scneider PLC
This cable can be used to connect the Ewon Flexy serial port to the MiniDin port of Schneider Micro, Premium and Twidoserial PLCs
A protocol converter that connects EtherNet/IP and OPC UA-MQTT control systems
The Anybus X-gateway EtherNet/IP Adapter to OPC UA-MQTT enables you to connect any EtherNet/IP system to any OPC UA-MQTT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The iPC-I XC16/PCI is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
A protocol converter that connects Modbus TCP devices to Modbus TCP PLCs
The Anybus X-gateway Modbus TCP Client to Modbus TCP Server enables you to connect any Modbus TCP device or equipment to Modbus TCP control systems. It can be used when there is no existing Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Midea to BACnet/IP & MS/TP - Up to 16 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Replaced by: IN770AIR00SO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allowed the integration of up to 8 indoor units from a single interface. Please refer to the new product reference for further details.