Ixxat PC-interfaces enable flexible access to your CAN-based devices from a PC – for development, commissioning or maintenance.
Mobile measuring of network traffic information for advanced diagnstics
The EtherTAP is a mobile monitoring interface that enables the in-depth analysis of PROFINET and EtherNet/IP traffic up to 1Gibt network speed.
Discontinued with no replacement available
Intesis ST Cloud Control was a bidirectional cloud-based solution to monitor and control any BACnet or Modbus device, whether from a web-based dashboard or an end-user-oriented app. The solution allowed the integration of up to 4 devices, with up to 12 widgets per device.
I/O Extension Module with Modbus RTU Interface
I/O Extension Module with Modbus RTU Interface - 8 Analog Inputs
DC Power Monitor with Modbus RTU interface
DC Power Monitor with Modbus RTU interface
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Specially designed for easy mounting for all CompactCom modules
The Anybus CompactCom is designed to use a compact flash connector as application connector. HMS offers a host connector, that is designed to simplify the mounting and to meet the demands for a secure and stable connection of the Anybus CompactCom modules (with or without housing).
A protocol converter that connects Interbus CU and PROFIBUS control systems
The Anybus X-gateway Interbus CU Slave to PROFIBUS Slave enables you to connect any Interbus CU system to any PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects ControlNet and FIPIO control systems
The Anybus X-gateway ControlNet Adapter to FIPIO Slave enables you to connect any ControlNet control system to any FIPIO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects DeviceNet devices to Modbus TCP PLCs
The Anybus X-gateway DeviceNet Master to Modbus-TCP Server enables you to connect any DeviceNet device or equipment to Modbus-TCP control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
An embedded SoC web controller with a DIL32 footprint for for Smart Grid Applications
The SC24 includes processor, RAM and FLASH memory, Ethernet and serial interfaces and GPIO on a DlL32 size. This embedded platform comes with a preinstalled real-time multitasking operating system IPC@CHIP®-RTOS and a license for the IEC 61850 stack PIS10.
Embedded SoC web controller for Smart Grid Applications
The SC143 includes processor, RAM and FLASH memory, Ethernet and serial interfaces, a complete microcontroller interface with address/data bus, programmable chip selects and GPIO. This embedded platform comes with the preinstalled IPC@CHIP®-RTOS and a lisense for the IEC 61850 stack PIS10.
CAN/CAN FD repeater with screw terminals
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
Enable communication between industrial devices and Industrial Ethernet networks
The Anybus CompactCom 40 Brick Mini Common Ethernet (Pre-loaded) is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET, EtherCAT, EtherNet/IP, Modbus TCP networks. Soldered directly onto the host’s carrier board and delivered in a tape-and-reel format, it’s ideal for automated manufacturing and high-volume production.
CAN/CAN FD Ethernet gateway, bridge and PC interface
The Ixxat CAN@net NT 420 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features four CAN channels, thereof two CAN FD capable, and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
Enable communication between industrial devices and PROFINET networks
The Anybus CompactCom 40 Brick Mini PROFINET is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. Soldered directly onto the host’s carrier board and delivered in a tape-and-reel format, it’s ideal for automated manufacturing and high-volume production.
Connects CAN/CAN FD components (22 cm, D-Sub 9 plug to socket/plug)
The Ixxat CAN Y-cable (0.22 m length) is used to easily loop through CAN or CAN FD networks. Its shielded design and twisted wires ensure minimal interference and reliable data transmission.
The iPC-I XC16/PCI is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The iPC-I 165/ISA is an active ISA PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.