Ixxat PC-interfaces enable flexible access to your CAN-based devices from a PC – for development, commissioning or maintenance.
A protocol converter that connects PROFIBUS and OPC UA-MQTT control systems
The Anybus X-gateway PROFIBUS Slave to OPC UA-MQTT enables you to connect any PROFIBUS system to any OPC UA-MQTT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Hitachi to KNX - 1 AW unit
The Hitachi-KNX interface allows full bi-directional communication between Hitachi Air-to-Water systems and KNX installations.
The Ixxat USB-to-CAN compact is a USB PC interface with one CAN channel. It is used to connect PCs and applications with CAN-based networks.
3G multiband 90 degree antenna
3G multiband 90 degree antenna
The PC-I 04/104 is a passive PC104 interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks.
CAN/CAN FD repeater with fiber optics and termination resistor
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
The MultiCAN expansion board for the Ixxat CAN-IB series provides the interface card with two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available CAN channels on a D-Sub 9 connector and reduces slot requirements, helping to expand CAN networks efficiently.
The iPC-I 165/ISA is an active ISA PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The Ixxat USB-to-CAN II is a USB PC interface with two CAN channels. It is used to connect PCs and applications with CAN-based networks.
The Ixxat USB-to-CAN compact RJ45 is a USB PC interface with one CAN channel and RJ45 CAN socket. It is used to connect PCs and applications with CAN-based networks.
The Ixxat CANbridge is a configurable CAN to CAN bridge with two CAN channels. The device has a plastic case for DIN rail mounting.
Configurable automotive platform (4 x CAN)
The Ixxat FRC-EP170 CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and up to four CAN channels, one of which is CAN low-speed capable, it is ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
PC interface card for CAN (2 x CAN), galv. isolated
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
PC interface card for CAN (1 x CAN), galv. isolated
The Ixxat CAN-IB400/PCI is an active PCI interface card with one CAN channel and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
The iPC-I 320/PCI II is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The iPC-I 320/PCI II is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The Industrial Ethernet Module is a compact PCB with two channels which enables the easy and fast implementation of various industrial Ethernet protocols into customer specific applications.
Piggyback module for CAN interface cards
The MultiCAN expansion board for the Ixxat CAN-IB series enhances the card's capabilities by providing two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available high-speed CAN channels on a D-Sub 9 connector and reduces slot requirements, making it ideal for expanding CAN networks efficiently.