AB9009-B, Anybus X-gateway - Modbus TCP Client - CC-LinkSlaveAB9009-BThe Anybus X-gateway Modbus TCP Client to CC-Link Slave enables you to connect any Modbus TCP device or equipment to CC-Link control systems., It can be used when there is no existing Modbus TCP control system., Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.Reach new marketsNo PLC card slot neededSlim hardware design3-year warrantyTarget new markets using different protocols without needing to change your hardware or software, thereby decreasing your time to market and development costs.The gateway does not use a card slot in the control system, leaving room for other equipment.The gateway is designed for IP20 and DIN-rail mounting, enabling you to install it with ease, close to connected devices, thereby reducing wiring requirements.The gateway is designed to be robust and long-lasting.

AB9009. www.anybus.com 1 2 3 5 6 7 8 4 Module Front Top View Power: (+) +24 V DC (-) GND ( A ) PE CC-Link Connector: Pin no Signal Description 1 DA Pos RS485 2 DB Neg RS485 3 DG Signal ground 4 SLD Cable shield 5 FG PE 5 1 SD card slot: USB port: Connect a PC to the USB port for firmware upgrades ., To comply with ATEX direcƟves, the equipment must be installed within an IP54 enclosure and must be installed with a transient suppressor on the supply that does not exceed 140% (33.6 V DC) of the nominal rated supply voltage., DO NOT USE, CONNECT OR DISCONNECT UNLESS THE AREA IS KNOWN TO BE NONHAZARDOUS., This may eventually wear the fastening mechanism out so it cannot be used efficiently., Be sure to push the DIN-rail fastening mechanism back into the fixed and closed posiƟon aŌer unmounƟng the module, according to the picture below.

Model HMS-EN2MB-R and Anybus X-gateway option boards, Model ABCC followed by letters or numbers, X – 0 Modbus-TCP series with ABCC30 option board X – 5 Modbus-TCP series with ABCC40 option board III., YY - 00 to 99 individual product configuration based on option board, software, etc., Model AB9000 – Anybus X-Gateway Modbus-TCP series with ABCC30-ECT Option Board * Model AB9001 - Anybus X-Gateway Modbus-TCP series with ABCC30-DPV Option Board * Model AB9002 – Anybus X-Gateway Modbus-TCP series with ABCC30-DEV Option Board * Model AB9003 – Anybus X-Gateway Modbus-TCP series with ABCC30-CNT Option Board * Model AB9004 – Anybus X-Gateway Modbus-TCP series with ABCC30-COP Option Board * Model AB9005 – Anybus X-Gateway Modbus-TCP series with ABCC30-RTU Option Board * Model AB9006 – Anybus X-Gateway Modbus-TCP series with ABCC30-EIP/2P Option Board * Model AB9007 – Anybus X-Gateway Modbus-TCP series with ABCC30-PRT Option Board * Model AB9008 – Anybus X-Gateway Modbus-TCP series with ABCC30-EIT/2P Option Board * Model AB9009 – Anybus X-Gateway Modbus-TCP series with ABCC30-CCL Option Board * Model AB9500 – Anybus X-Gateway Modbus-TCP series with ABCC40-ECT Option Board * Model AB9501 – Anybus X-Gateway Modbus-TCP series with ABCC40-DPV Option Board * Model AB9502, Model HMS-EN2MB-R – Anybus X-Gateway Modbus-TCP series with Anybus EEM-EIP Option Board * * See nomenclature for option boards below [13] Schedule [14] TYPE EXAMINATION CERTIFICATE No.