FEAT U R ES AND BENEFITS ORDER NUMBER 1.01.0067.44300 Display 2 x CAN status LED (duo LED for communication and errors), Power LED CAN channels (high-speed) 2 CAN bus interface ISO 11898-2 with CAN choke. 2 x D-Sub 9 connectors CAN bit rates Up to 1 Mbit/s CAN bus termination resistors 120 Ohm switchable via DIP switch CAN high-speed transceiver SN65HVD251 Cost savings due to simple wiring ■ Almost no influence on real-time behavior ■ Greater flexibility in CAN network design ■ Separates a defective segment, allowing the remaining network to continue working ■ Increased system reliability ■ 2 x CAN interfaces ■ Galvanic isolation ■ Protection of segments up to 4 kV DC/4 kV AC ■ DATA S H E E T C A N - C R 2 2 0 V24-09 www.hms-networks.com/ixxat Page 2 of 3 ORDER NUMBER 1.01.0067.44300 Galvanic isolation 4 kV DC/4 kV AC for 1 sec., 4 kV DC/3.75 kV AC for 1 min., 3 kV AC for 3 min.; CAN 1, CAN 2 and power supply galvanic isolated against each other., CAN-CR220 Datasheet 1.01.0067.44300 (English)
3.4 en-US Technical Data 16 (22) 9 Technical Data Weight Approx. 300 g Operating temperature -20 °C to +70 °C Storage temperature -40 °C to + 85 °C Power supply +9 V to +32 V DC Housing material Polyamid CAN transceiver Texas Instruments SN65HVD251 Max. number of bus nodes 120 CAN bus termination resistor 120 Ohm switchable via DIP switch CAN bit rate 1 Mbit/s Protection class IP30 Relative humidity 10 to 95 %, non-condensing CAN-CR200 Dimensions 22.5 x 100 x 118 mm Current consumption at 24 V Typ. 41 mA, max. 100 mA Galvanic isolation 1 kV DC/1 sec, 500 V AC/1 min CAN 1, CAN 2 and backbone bus galvanically isolated against each other CAN propagation delay (typical) Typ. 200 ns (40 m bus length) CAN-CR220 Dimensions 22.5 x 100 x 118 mm Current consumption at 24 V Typ. 41 mA, max. 100 mA Galvanic isolation CAN 1, CAN 2 and power supply galvanically isolated against each other 1.01.0067.44400: 2 kV AC/1 min, 3.5 kV AC/1 sec, 3.2 kV DC/1 min, 4 kV DC/1 sec 1.01.0067.44300