Wires, cables, mounting kits and other add-ons to HMS products.
Connects computers and embedded systems to industrial Ethernet networks
The Ixxat INpact CE Slave PCIe is a versatile and efficient solution to embedded systems or PCs to various industrial networks. This Common Ethernet variant offers preinstalled or downloadable Industrial Ethernet protocols, enabling flexible multi-network communication in a robust PCIe format.
Accessory for Ixxat FRC-EP190 and FRC-EP170
The Ixxat Remote/debug cable is used to facilitate remote management and debugging of FRC-EP170 and FRC-EP190 devices. Featuring a 7-pin Binder plug (REMOTE) and a D-Sub 9 9 socket (RS232), it ensures optimal compatibility for connecting to PCs for diagnostics, firmware updates, or configuration changes.
Connects CAN/CAN FD components (22 cm, D-Sub 9 plug to socket/plug)
The Ixxat CAN Y-cable (0.22 m length) is used to easily loop through CAN or CAN FD networks. Its shielded design and twisted wires ensure minimal interference and reliable data transmission.
Antenna for Ixxat CANblue II (2.0 m cable)
The Ixxat Screwable Antenna Foot with RP-SMA connectors is an essential accessory for usage with Ixxat CANblue II devices. It features a 2.0 m cable for flexible positioning and is suitable for both indoor and outdoor environments when protected against water and moisture.
Connects Ixxat INpact interface boards and bus coupling units (300 mm)
The INpact cable, with a length of 300 mm, serves as an essential link between the bus coupling unit and the INpact interface board. It enables reliable signal and data transmission over a short distance between the components.
Accessory for Ixxat Mobilizer
The Ixxat Mobilizer DIN Rail Mount is a useful accessory for the Ixxat Mobilizer Series, enabling secure installation of the device on standard 35 mm grounded DIN rails. Made of aluminum and supplied with four screws, the mount is attached to the device and snapped into place on the rail for quick and stable installation.
Connects CAN/CAN FD components (D-Sub 9 plug)
The Ixxat D-Sub 9 connector with switchable termination resistor offers a simple and flexible solution to connect CAN interfaces to CAN networks. With the terminating resistor switched on, the connector can be used to terminate the bus at the end node. With the terminating resistor switched off and a looped cable, participants can be easily integrated into the bus, whereby the stub line is kept to a minimum. The plug also offers the option of connecting two cables simultaneously.
Accessory for Ixxat FRC-EP190 and CANnector
The Ixxat CAN/LIN/K-Line breakout cable (0.5 m length) provides an easy way to connect devices to various interfaces like CAN, LIN and K-Line signals. It's specifically designed for usage with the Ixxat FRC-EP190 or CANnector device series.
Accessory for Ixxat FRC-EP190 (Plus CANonly variant)
The Ixxat HD15 DoubleCAN cable with D-Sub HD 15 and D-Sub 9 connectors is a practical accessory for the FRC-EP190 Plus CANonly device. It is used to easily separate two different CAN interfaces, with each connector offering distinct interface options. Its shielded design and twisted wires ensure reliable data transmission.
Enabling industrial Ethernet connection for Ixxat INpact boards
The Ixxat INpact PCIe Mini bus coupling unit for Ethernet serves as the link between the fieldbus network and the INpact interface card, together with the included cable for connecting them.
Accessory for Ixxat FRC-EP190 and FRC-EP170
The Ixxat FlexRay 1:1 cable connects the FlexRay-1A interface of the FRC-EP170 or the FRC-EP190 to a standard D-Sub 9 connector. It features an integrated FlexRay termination resistor in the device-side connector housing for reliable performance.
Connects multiple CAN Repeaters with backbone bus
The Ixxat T-Bus connector is designed for linking multiple CAN Repeaters with a backbone bus to a central hub. It supports the creation of star and tree network topologies, thereby extending the coverage of the CAN network and simplifying the wiring process.
Termination for CAN/CAN FD networks (D-Sub 9 plug)
The Ixxat Sub-D9 connector with two CAN terminations ensures proper termination of CAN and CAN FD buses. It features a D-Sub 9 male to female gender changer design and is used when a CAN node lacks internal termination or if no CAN node is connected at the end of the CAN bus. Per ISO 11898-2, high-speed CAN systems require end resistors.
Accessory for Ixxat FRC-EP190 and FRC-EP170
The Ixxat FlexRay/CAN/IO breakout cable (1.5 m length) transforms the D-Sub HD15 connector of FRC-EP190 or FRC-EP170 devices into multiple separate open ended (pigtail) connectors. It offers connectivity to various interfaces like FlexRay, CAN, and digital I/O signals, enhancing the devices' adaptability.
Accessory for Ixxat FRC-EP170, FRC-EP190 and CANnector
The Ixxat USB WiFi extension offers WiFi capability for the Ixxat CANnector and FRC-EP170/190 series through a USB 2.0 interface. This facilitates wireless data transmission, remote access, and seamless integration into networks, without the need for physical Ethernet cables.
Antenna for Ixxat CANblue II
The Ixxat Stub Antenna with a RP-SMA plug is an essential accessory for usage with Ixxat CANblue II devices. Its 1/2-wave coaxial dipole ensures stable wireless data transmission, while the 90° swivel toggle allows for ideal positioning and optimized signal coverage.
Accessory for Ixxat FRC-EP190 (FlexRay Plus 4 and Max EtherCAT variant)
The Ixxat HD15 DoubleCAN + FlexRay cable is a practical accessory for FRC-EP190 FlexRay Plus 4 and Max EtherCAT devices. It is used to easily separate different interfaces, enabling simultaneous connection of CAN and FlexRay devices. It features an integrated FlexRay termination resistor in the device-side connector housing for reliable performance.
Connects CAN/CAN FD components (210 cm, D-Sub 9 plug to socket/plug)
The Ixxat CAN Y-cable (2.1 m length) is used to easily loop through CAN or CAN FD networks. Its shielded design and twisted wires ensure minimal interference and reliable data transmission.
