Midea to BACnet/IP & MS/TP - Up to 4 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Mitsubishi Electric to BACnet/IP & MS/TP - Up to 15 groups
The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 15 groups from a single interface.
Hisense to KNX - Up to 4 Indoor Units
The Hisense application allows bidirectional control and monitoring of Hisense VRF systems from a KNX installation. This solution allows the integration of up to 4 indoor units.
Samsung to KNX - Up to 4 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
KNX to Modbus TCP & RTU - 600 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
BACnet/IP & MS/TP to KNX - 600 points
Integrate any BACnet MS/TP or BACnet/IP server device with any KNX device or system. This integration aims to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
DALI to BACnet/IP- 2 DALI channels
Integrate any DALI/DALI-2 driver and DALI-2 light or occupancy sensor with a BACnet/IP BMS or controller. This integration aims to make DALI devices and their data and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
M-BUS to BACnet/IP - 50 devices
Integrate any M-Bus device with a BACnet/IP BMS or controller. This integration aims to make M-Bus devices, their registers, and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
Bosch to KNX - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 64 indoor units from a single interface.
Midea to Modbus TCP/RTU - Up to 64 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Hisense to Home Automation - Up to 64 Indoor Units
The Hisense application allows bidirectional control and monitoring of Hisense VRF systems from a Home Automation system. This solution allows the integration of up to 64 indoor units.
OCPP to Modbus TCP & RTU - Up to 1 charger
Configure this gateway as a Modbus RTU/TCP - OCPP protocol translator or move a step further with its OCPP Central System mode, which allows the gateway and the BMS to substitute the Central System of the OCPP installation and get all the potential of the Modbus-based BMS.
Panasonic to BACnet/IP & MS/TP - Up to 64 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.
Hisense to Modbus - 1 indoor unit
The Hisense-Modbus interface allows full bidirectional communication between Hisense VRF systems and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit. A wired remote controller can also be part of the network.
M-BUS to Modbus TCP - 20 devices
Integrate any M-Bus device with a Modbus TCP BMS or controller. This integration aims to make M-Bus devices, their registers, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
KNX to BACnet/IP & MS/TP - 3000 points
Integrate any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
Mitsubishi Electric to BACnet/IP & MS/TP - Up to 50 groups
The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 50 groups from a single interface.
KNX to Modbus TCP & RTU - 1200 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.