CAN Bluetooth bridge and PC interface (external antenna)
The Ixxat CANblue II is a versatile and cost-effective Bluetooth module for CAN systems that can be used with an external antenna. It offers three operation modes: PC interface, bridge, and gateway, making it suitable for various application areas. It is ideal for mobile configuration, analysis, and conveniently bridging CAN networks via Bluetooth.
Plug-in CANopen module for SIMATIC® ET200S systems
The Ixxat 1 SI CANopen is a compact module for SIMATIC ET200S modular I/O systems, offering an easy and cost-effective way to connect CANopen devices. It enables seamless integration and control of CAN/CANopen networks via PROFIBUS or PROFINET, without extra gateways, facilitating the expansion of automation systems and increasing their efficiency.
Configurable automotive platform (1x EtherCAT, 6x CAN, thereof 2x CAN FD)
The Ixxat CANnector SE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN, two Digital in/out and six CAN channels, two of which are CAN FD capable, including Industrial Ethernet support. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (1x FlexRay, 8x CAN, thereof 4x CAN FD)
The Ixxat FRC-EP190 FlexRay Plus 4 is a powerful solution for automotive uses. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
CAN Bluetooth bridge and PC interface with internal antenna
The Ixxat CANblue II is a versatile and cost-effective Bluetooth module for CAN systems that is equipped with an internal antenna. It offers three operation modes: PC interface, bridge, and gateway, making it suitable for various application areas. It is ideal for mobile configuration, analysis, and conveniently bridging CAN networks via Bluetooth.
CAN repeater with fiber optics (ST) and backbone bus
The Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optic interface (ST plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
CAN repeater with fiber optics (F-SMA) and backbone bus
The Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optic interface (FSMA plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
Configurable automotive platform (1x FlexRay, 6x CAN, thereof 2x CAN FD)
Ixxat FRC-EP170 Plus is an advanced solution for automotive uses that integrates multiple bus systems. It features six CAN channels, two of which are CAN FD capable, including FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation applications. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
CAN/CAN FD repeater with screw terminals and termination resistor
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.
CAN repeater with 4 kV DC/3.5 kV AC galvanic isolation
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 4 kV DC/3.5 kV AC for 1 second, enhancing the protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
Configurable automotive platform (1x EtherCAT, 8x CAN, thereof 4x CAN FD)
The Ixxat CANnector LE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN, two Digital in/out and eight CAN channels, four of which are CAN FD capable, including Industrial Ethernet support. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
CAN repeater with 4 kV DC/4 kV AC galvanic isolation
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 4 kV DC/4 kV AC for 1 second, enhancing the protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
Configurable automotive platform (1x FlexRay, 4x CAN)
The Ixxat FRC-EP170 is an advanced solution for automotive engineering that integrates multiple bus systems. It features four CAN channels, one of which is CAN low-speed capable, including FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation applications. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (1x EtherCAT, 1x FlexRay, 8x CAN, thereof 4x CAN FD)
The Ixxat FRC-EP190 Max EtherCAT is a powerful and versatile solution for automotive uses. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers EtherCAT, FlexRay, LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
CAN/CAN FD repeater with 3 kV galvanic isolation and termination resistor
The Ixxat CAN-CR120/HV repeater with two CAN/CAN FD interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. With integrated termination resistors.
CAN/CAN FD repeater with fiber optics
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures.