
USB-to-CAN series
Ideal for CAN configuration and analysis applications, but also for control. Use on a desktop PC as well as mobile in the field or workshop.
Ixxat PC interfaces enable flexible access to CAN or Industrial Ethernet networks from a PC — for development, commissioning, maintenance, control and monitoring. Available for all common PC interface standards and form factors.
A protocol converter that connects CANopen devices to Modbus TCP PLCs
The Anybus X-gateway CANopen Master to Modbus TCP Server enables you to connect any CANopen Master device or equipment to Modbus TCP control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
BACnet MS/TP to BACnet/IP - 32 devices
Integrate BACnet MS/TP with BACnet IP devices with our BACnet Router. It is a compact BACnet multi-network device that provides smooth routing between BACnet/IP and BACnet MS/TP networks. This integration aims to make BACnet devices, their objects, and resources accessible regardless of the BACnet network they are connected to.
Replaced by: IN770AIR00SO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Provides simple, robust networking with Gigabit speed and low power consumption.
The Anybus Unmanaged L2 Switch creates simple and robust data networks in harsh industrial settings. With Gigabit throughput and ultra-low power consumption, it’s ideal for small networks where reliable and basic connectivity meets application requirements.
A protocol converter that connects serial devices to PROFIBUS control systems
The Anybus Communicator Serial Master to PROFIBUS IO-Device ATEX enables you to connect any RS-232/485 device or equipment to PROFIBUS control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
Discover repeaters in unusual environments
The Anzbus D1 Repeater is ready made to be deployed for rain and dust, providing seamless communication
Replaced by: IN701KNX1000000
Designed for the integration of BACnet MS/TP or BACnet/IP server devices with any KNX device or system. This integration aimed to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa. Please refer to the new product reference for further details.
Enable easy network expansion over long distnaces
The Anybus PROFIBUS Fiber Optic module is a unique product that allows long cable distances and a galvanic isolation between devices and segments.
Haier to KNX - 16 indoor units
The Haier-KNX gateway allows bidirectional communication between Haier Commercial and VRF systems and KNX installations. This communication brings total control of the AC unit from KNX, including monitoring of the AC unit’s internal variables, running hours counter (for filter maintenance control), and error codes.
The iPC-I 320/PCI II is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
Simple & easy expansion of PROFIBUS installations
The Anybus B1 repeater is your ideal solution to overcome the limit of PROFIBUS networks by providing clean signals over an extended network
Replaced by: IN770AIR00SO000
This Hisense application was designed to allow bidirectional control and monitoring of Hisense VRF systems from a KNX installation. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
The PC-I 04/104 is a passive PC104 interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks.
A protocol converter that connects EtherNet/IP and Interbus FO control systems
The Anybus X-gateway EtherNet/IP Adapter to Interbus FO Slave enables you to connect any EtherNet/IP system to any Interbus FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Replaced by: IN701KNX1K20000
Designed for the integration of any KNX device or installation with a Modbus BMS or any Modbus TCP/RTU controller. This integration aimed to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa. Please refer to the new product reference for further details.
A protocol converter that connects Modbus TCP devices to PROFINET control systems
The Anybus Communicator Modbus TCP Client to PROFINET enables you to connect Modbus TCP devices to PROFINET control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfer between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A pocket size tool for speeding up the assembly of a PROFINET cable.
The PROFINET Cable Striping Tool removes the sheath and exposes the shielding with the exact length for the required plugs. No cable is wasted and it eliminates other tools.
Ultrasonic tank sensor with a RS-485 modbus interface
Ultrasonic tank sensor with a RS-485 modbus interface