
USB-to-CAN series
Ideal for CAN configuration and analysis applications, but also for control. Use on a desktop PC as well as mobile in the field or workshop.
Ixxat PC interfaces enable flexible access to CAN or Industrial Ethernet networks from a PC — for development, commissioning, maintenance, control and monitoring. Available for all common PC interface standards and form factors.
A protocol converter that connects Modbus Plus and Modbus Plus control systems
The Anybus X-gateway Modbus Plus Slave to Modbus Plus Slave enables you to connect any Modbus Plus system to any Modbus Plus control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
KNX to Modbus TCP & RTU - 250 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
I/O Extension Module with Modbus RTU Interface
I/O Extension Module with Modbus RTU Interface - 8 Digital IO
Bosch to Modbus TCP/RTU - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
A protocol converter that connects CANopen devices to DeviceNet PLCs
The Anybus X-gateway CANopen Master to DeviceNet Adapter enables you to connect any CANopen Master device or equipment to DeviceNet control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
LG to Modbus - 1 indoor unit
The LG-Modbus interface allows full bidirectional communication between LG VRF systems and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit. A wired remote controller can also be part of the network.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
The ultimate IIoT solution for data visualization and analysis
Combined with an Ewon Flexy or Netbiter, the i4connected IIoT solution enhances the efficiency of complex industrial processes by seamlessly connecting plants, buildings, machines, equipment and sensors – wherever they are – enabling real-time visualization and empowering data-driven decisions.
Mitsubishi Electric to Home Automation - 1 indoor unit
The Mitsubishi Electric gateway allows complete and natural integration of Mitsubishi Electric Domestic, Mr. Slim, and City Multi Air Conditioner units into IP-based Home Automation systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi.
A protocol converter that connects Interbus FO and Interbus FO control systems
The Anybus X-gateway Interbus FO Slave to Interbus FO Slave enables you to connect any Interbus FO system to any Interbus FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
KNX to ASCII IP & ASCII Serial - 3000 points
Integrate any KNX device or installation with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aims to make KNX communication objects and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa.
Replaced by: IN770AIRXXSO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allowed the integration of up to 4 indoor units from a single interface. Please refer to the new product reference for further details.
Enable communication between industrial devices and EtherNet/IP networks
The Anybus CompactCom 40 M12 - EtherNet/IP is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherNet/IP networks. The module version includes network connectors to simplify installation, helping you achieve a fast time to market.
Replaced by: IN770AIR00SO000
The Bosch-Modbus gateway allowed bidirectional communication between Bosch Commercial and VRF systems and Modbus RTU (RS-485) networks, bringing total control and supervision of the AC unit through its internal variables. Please refer to the new product reference for further details.
DC Power Monitor with Modbus RTU interface
DC Power Monitor with Modbus RTU interface
A protocol converter that connects CANopen devices to Modbus RTU PLCs
The Anybus X-gateway CANopen Master to Modbus RTU Slave enables you to connect any CANopen Master device or equipment to Modbus RTU control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Hisense to BACnet/IP & MS/TP - Up to 16 Indoor Units
The Hisense application has been specially designed to allow bidirectional control and monitoring of Hisense VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.
A protocol converter that connects PROFINET IRT Fiber Optic and EtherNet/IP control systems
The Anybus X-gateway PROFINET IRT Fiber Optic Slave -EtherNet/IP Slave enables you to connect any PROFINET IRT Fiber Optic system to any EtherNet/IP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.