Anybus Diagnostics products make sure industrial networks don't go down. The network diagnostic tools and products provide permanent monitoring and troubleshooting along with a range of services that ensure network uptime.
A protocol converter that connects Interbus CU and OPC UA-MQTT control systems
The Anybus X-gateway Interbus CU to OPC UA-MQTT enables you to connect any Interbus CU system to any OPC UA-MQTT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
CAN/CAN FD repeater with fiber optics and termination resistor
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
PC interface card for CAN (2 x CAN), galv. isolated
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Replaced by: IN770AIR00SO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
A protocol converter that connects ControlNet and Lonworks control systems
The Anybus X-gateway ControlNet Adapter to Lonworks Slave enables you to connect any ControlNet control system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
LG to KNX - 1 indoor unit
The LG-KNX interface allows full bidirectional communication between LG VRF systems and KNX installations. It has four potential-free binary inputs to integrate external devices (such as window contacts or presence detectors), with the corresponding internal functions available to help improve energy efficiency.
A protocol converter that connects Modbus RTU and Modbus Plus control systems
The Anybus X-gateway Modbus RTU Slave to Modbus Plus Slave enables you to connect any Modbus RTU system to any Modbus Plus control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Web-based management control system for your building management system.
i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.
A protocol converter that connects CANopen and Interbus FO control systems
The Anybus X-gateway CANopen Slave to Interbus FO Slave enables you to connect any CANopen system to any Interbus FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Replaced by: IN701KNX1K20000
Designed for the integration of any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
Midea to KNX - 1 indoor unit
The Midea-KNX interface allows full bidirectional communication between Midea Commercial and VRF systems and KNX installations. It connects directly to the indoor unit and delivers complete interoperability with KNX.
A protocol converter that connects EtherNet/IP and Interbus FO control systems
The Anybus X-gateway EtherNet/IP Adapter to Interbus FO Slave enables you to connect any EtherNet/IP system to any Interbus FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Replaced by: IN701KNX1K20000
Designed for the integration of any KNX device or installation with a Modbus BMS or any Modbus TCP/RTU controller. This integration aimed to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa. Please refer to the new product reference for further details.
Piggyback module for CAN interface cards
The MultiCAN expansion board for the Ixxat CAN-IB series enhances the card's capabilities by providing two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available high-speed CAN channels on a D-Sub 9 connector and reduces slot requirements, making it ideal for expanding CAN networks efficiently.
Replaced by: IN770AIR00SO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
With Anybus NetTool for DeviceNet, the configuration software for DeviceNet, you can define the DeviceNet configuration for your device. It’s downloaded to the module via the HMS configuration software NetTool-DN or Rockwell´s RSNetWorx. NetTool-DN can be connected via a configuration port on the module, from DeviceNet or the application interface.
Replaced by: IN770AIRXXSO000
The Bosch-Modbus gateway allowed bidirectional communication between Bosch Commercial and VRF systems and Modbus RTU (RS-485) networks, bringing total control and supervision of the AC unit through its internal variables. Please refer to the new product reference for further details.