USB-to-CAN compact RJ45
Item number: 1.01.0088.90001
The Ixxat USB-to-CAN compact RJ45 is a USB PC interface with one CAN channel and RJ45 CAN socket. It is used to connect PCs and applications with CAN-based networks.
Anybus Diagnostics products make sure industrial networks don't go down. The network diagnostic tools and products provide permanent monitoring and troubleshooting along with a range of services that ensure network uptime.
The Ixxat USB-to-CAN compact RJ45 is a USB PC interface with one CAN channel and RJ45 CAN socket. It is used to connect PCs and applications with CAN-based networks.
Web-based management control system for your building management system.
i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.
The iPC-I 320/PCI II is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The Industrial Ethernet Module is a compact PCB with two channels which enables the easy and fast implementation of various industrial Ethernet protocols into customer specific applications.
The Ixxat USB-to-CAN II is a USB PC interface with two CAN channels. It is used to connect PCs and applications with CAN-based networks.
A protocol converter that connects EtherCAT and Lonworks control systems
The Anybus X-gateway EtherCAT Slave to Lonworks Slave enables you to connect any EtherCAT system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
The MultiCAN expansion board for the Ixxat CAN-IB series provides the interface card with two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available CAN channels on a D-Sub 9 connector and reduces slot requirements, helping to expand CAN networks efficiently.
Configurable automotive platform (4x CAN)
The Ixxat FRC-EP170 CANonly is a compact solution for automotive uses, focusing on CAN-based operations. It features four CAN channels, one of which is CAN low-speed capable, including LIN and Digital in/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation applications. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).
The iPC-I 320/PCI II is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The PC-I 04/104 is a passive PC104 interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks.
Replaced by: IN701KNX1K20000
Designed for the integration of any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
A weather resistant 4 channel repeater
The Anybus A5 is designed for simple network segmentation in harsher environments with its IP 65 classification
CAN/CAN FD repeater with fiber optics and termination resistor
The Ixxat CAN-CR110/FO repeater with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Connects computers and embedded systems to industrial Ethernet networks
The Ixxat INpact CE Slave PCIe Mini M12 Kit is a versatile and efficient solution to connect embedded systems and PCs to various industrial networks. This Common Ethernet variant offers preinstalled or downloadable protocols, enabling flexible multi-network communication in a compact PCIe Mini format with M12 connectors. The kit includes an Ixxat INpact PCIe Mini, a connection cable and a bus coupling unit.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.