Anybus Diagnostics products make sure industrial networks don't go down. The network diagnostic tools and products provide permanent monitoring and troubleshooting along with a range of services that ensure network uptime.
A pocket size tool for speeding up the assembly of a PROFINET cable.
The PROFINET Cable Striping Tool removes the sheath and exposes the shielding with the exact length for the required plugs. No cable is wasted and it eliminates other tools.
A pocket size tool for speeding up the assembly of a PROFIBUS cable.
The PROFIBUS Cable Striping Tool removes the sheath and exposes the shielding with the exact length for the required plugs. No cable is wasted and it eliminates other tools.
KNX to Modbus TCP & RTU - 3000 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
BACnet/IP & MS/TP to KNX - 1200 points
Integrate any BACnet MS/TP or BACnet/IP server device with any KNX device or system. This integration aims to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
Hitachi to BACnet MS/TP - 1 indoor unit
The Hitachi-BACnet interface allows full bidirectional communication between Hitachi VRF units and BACnet MS/TP networks. The interface enables BACnet communication via polling or subscription requests (COV), making the indoor unit available through independent BACnet objects. A wired remote controller can also be connected.
Ultrasonic tank sensor with a RS-485 modbus interface
Ultrasonic tank sensor with a RS-485 modbus interface
Industrial Security Appliance with Industrial Protocol Screening and Asset Access Control
Advanced industrial security appliance engineered to provide unparalleled protection for operational technology (OT) networks. Featuring a robust combination of NAT, Routing as well as Deep Packet Inspection (DPI) on common industrial protocols and Intrusion Detection it serves as a cornerstone for safeguarding both manufacturing and critical infrastructure against a myriad of cyberthreats.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Replaced by: IN701KNX1K20000
Designed for the integration of any KNX device or installation with a Modbus BMS or any Modbus TCP/RTU controller. This integration aimed to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa. Please refer to the new product reference for further details.
The iPC-I 165/ISA is an active ISA PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
Web-based management control system for your building management system.
i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.
The FR-IB100 is a PCIe PC interface with two FlexRay channels, enabling the connection of PC-based applications to FlexRay networks.
A protocol converter that connects PROFIBUS DP-V0 to OPC UA-MQTT information systems
The Anybus X-gateway IIoT PROFIBUS DP-V0 Slave to OPC UA-MQTT publishes process data from any PROFIBUS control system to OPC UA or MQTT information systems.
Replaced by: INWFIPAN001R100
The AC Cloud Control device for Panasonic allowed a complete and natural integration of ECOi and PACi systems into the AC Cloud Control for professional HVAC control and monitoring through a native Android/iOS app or a web dashboard. Please refer to the new product reference for further details.
The Ixxat USB-to-CAN compact is a USB PC interface with one CAN channel. It is used to connect PCs and applications with CAN-based networks.
The Ixxat CANbridge is a configurable CAN to CAN bridge with two CAN channels. The device has a plastic case for DIN rail mounting.
The PC-I 04/PCI is a passive PCI interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks.
Replaced by: IN701KNX1K20000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with any KNX device or system. This integration aims to make Modbus register data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa. Please refer to the new product reference for further details.