Anybus Diagnostics products make sure industrial networks don't go down. The network diagnostic tools and products provide permanent monitoring and troubleshooting along with a range of services that ensure network uptime.
A protocol converter that connects DeviceNet devices to DeviceNet PLCs
The Anybus X-gateway DeviceNet Master to DeviceNet Adapter enables you to connect any DeviceNet device or equipment to DeviceNet control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The R-C Snubber is intended to suppress the “inductive kick” from motors, solenoids or relay coils. High energy noise spikes are generated whenever current is interrupted through an inductive load. These noise spikes may interfere with associated equipment causing erratic operation and may also accelerate relay contact wear. Applied across an inductive load, the R-C snubber suppresses the noise spikes and extends contact life.
Replaced by: IN704DAL1280000
Designed for the integration of any DALI/DALI-2 driver and sensors with a Modbus BMS or any Modbus TCP controller. This integration aimed to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system. Please refer to the new product reference for further details.
Industrial VPN gateway for IIoT data collection & monitoring
The Ewon Flexy is a multipurpose IIoT data gateway that allows machine builders and users to monitor and collect vital KPIs for analysis and predictive maintenance. The Ewon Flexy 201 is an Ewon gateway based on a 4 Ethernet ports.
A protocol converter that connects EtherNet/IP and EtherNet Modbus TCP control systems
The Anybus X-gateway EtherNet/IP Slave -Ethernet Modbus TCP Slave enables you to connect any Modbus TCP system to any EtherNet/IP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The EtherTAP2 is a permanent monitoring interface that enables the in-depth analysis of EtherNet/IP traffic up to 100Mbit network speed.
Manage & Reduce Termination faults on PROFIBUS DP RS-485
The T1 Terminator provides active termination for PROFIBUS segments which are based on RS 485.
Replaced by: IN775FGL00SO000
This Fujitsu application was designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a KNX installation. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Specially designed for easy mounting for all CompactCom modules
The Anybus CompactCom is designed to use a compact flash connector as application connector. HMS offers a host connector, that is designed to simplify the mounting and to meet the demands for a secure and stable connection of the Anybus CompactCom modules (with or without housing).
LG to Modbus - 1 indoor unit
The LG-Modbus interface allows full bidirectional communication between LG VRF systems and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit. A wired remote controller can also be part of the network.
A protocol converter that connects Modbus TCP and POWERLINK control systems
The Anybus X-gateway Modbus TCP Server to POWERLINK Device enables you to connect any Modbus TCP system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Panasonic to Modbus RTU - 1 indoor unit
The Panasonic-Modbus interface allows full bidirectional communication between Panasonic ECOi and PACi air conditioner units and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit. A wired remote controller can also be part of the network.
Powerful networking with reliable remote monitoring and control capabilities
The E3 I/O module streamlines networks with high-performing and flexible Ethernet connectivity. 32 discrete inputs for double density. Fast redundancy, password security, diagnostics and rugged design ensure reliable performance and reduced downtime in remote and extreme settings.
Powerful networking with reliable remote monitoring and control capabilities
The E3 I/O module streamlines networks with high-performing and flexible Ethernet connectivity. 32 discrete outputs for double density. Fast redundancy, password security, diagnostics and rugged design ensure reliable performance and reduced downtime in remote and extreme settings.
Manage industrial processes remotely with onboard I/O ideal for harsh environments.
The VT-MIPM-138-D IPm® Industrial RTU Controller provides powerful control in industrial automation applications. Feature-rich functionalities include onboard I/O options, datalogging, custom programming and a communications gateway. Built to last in the most demanding applications.
Functional Safety over EtherCAT (FSoE) protocol stack
The Ixxat Functional Safety over EtherCAT (FSoE) product line license enables the implementation of EtherCAT MainDevice (Master) functionalities in safety-critical industrial applications, providing reliable and secure communication. This variant offers unlimited installations within a single customer's product line, which may include various products.
A PID controller for basic needs with universal input capability
The PXU 1/8 DIN, AC Power, 4 to 20 mA, 2 User Inputs, RS-485 PID Controller is simple to program with a large, easy to read display that’s easy to mount in small areas. Dependable operation in industrial environments. Give your operation full confidence with industry-leading PID control for a range of applications.
A PID controller for basic needs with universal input capability
The PXU 1/16 DIN, DC Power, Dual Relay Output, Retransmitted Output, 1 User Input, RS-485 PID Controller is simple to program with a large, easy to read display that’s easy to mount in small areas. Dependable operation in industrial environments. Give your operation full confidence with industry-leading PID control for a range of applications.