Anybus Diagnostics products make sure industrial networks don't go down. The network diagnostic tools and products provide permanent monitoring and troubleshooting along with a range of services that ensure network uptime.
Replaced by: IN770AIR00MO000
This Hitachi application was designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or BACnet MS/TP client. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
Daikin to KNX - 1 indoor unit
The Daikin-KNX interface allows full bidirectional communication between Daikin AC Domestic units and KNX installations. It has four potential-free binary inputs available to integrate and configure external devices (window contacts or presence detectors) to improve energy efficiency.
Mitsubishi Electric to Home Automation - 1 indoor unit
The Mitsubishi Electric gateway allows complete and natural integration of Mitsubishi Electric Domestic, Mr. Slim, and City Multi Air Conditioner units into IP-based Home Automation systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi.
Mitsubishi Heavy Industries to Home Automation - 1 indoor unit
The Mitsubishi Heavy Industries gateway allows complete and natural integration of Mitsubishi Heavy Industries Domestic Air Conditioner units into IP-based Home Automation systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi.
Enable seamless integration of serial devices to Studio 5000
The Anybus EtherNet/IP to PROFIBUS Linking Device converts PROFIBUS to EtherNet/IP, enabling you to connect any PROFIBUS device to a Logix PLC control system. The linking device presents PROFIBUS data as easily processed I/O data, offloading the PLC from working with extra calculations and allowing for seamless integration with Studio 5000.
Panasonic to Home Automation - 1 indoor unit
The Panasonic gateway allows complete and natural integration of Panasonic ECOi and PACi Air Conditioner units into IP-based Home Automation Systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi. A wired remote controller can also be connected.
Enable communication between industrial devices and EtherNet/IP networks
The Anybus CompactCom 40 M12 Without Housing - EtherNet/IP is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherNet/IP networks. The module version includes network connectors to simplify installation, helping you achieve a fast time to market.
A protocol converter that connects serial devices to Industrial Ethernet control systems
The Anybus Communicator Serial Master to Common Ethernet ATEX enables you to connect any RS-232/485 device or equipment to PROFINET, EtherCAT, EtherNet/IP, and Modbus TCP control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers. The intuitive user interface makes them incredibly easy to use.
KNX to Modbus TCP & RTU - 250 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
DALI to Modbus TCP & RTU - 1 DALI channel
Integrate any DALI/DALI-2 driver and DALI-2 light sensor or occupancy sensor with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
BACnet/IP & MS/TP to ASCII IP & Serial - 600 points
Integrate any BACnet MS/TP or BACnet/IP server device with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aims to make BACnet objects, data, and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa.
Mitsubishi Heavy Industries to Home Automation - Up to 4 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Fujitsu to Home Automation - Up to 64 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Midea to BACnet/IP & MS/TP - Up to 64 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.
Mitsubishi Electric Domestic to Modbus - 1 indoor unit
The Mitsubishi Electric-Modbus interface allows full bidirectional communication between Mitsubishi Electric Domestic, Mr. Slim, and City Multi air conditioner units and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit.
Discontinued with no replacement available
Intesis ST Cloud Control was a bidirectional cloud-based solution to monitor and control any BACnet or Modbus device, whether from a web-based dashboard or an end-user-oriented app. The solution allowed the integration of up to 4 devices, with up to 12 widgets per device.
Replaced by: IN7004853K00000
Designed for the integration of any BACnet MS/TP or BACnet/IP server device with an ASCII BMS or any ASCII IP or ASCII serial controller. This integration aimed to make BACnet objects, data, and resources accessible from an ASCII-based control system or device as if they were a part of the ASCII system and vice versa. Please refer to the new product reference for further details.
Replaced by: IN770AIRXXSO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allowed the integration of up to 4 indoor units from a single interface. Please refer to the new product reference for further details.