Gateways (protocol converters) are the fastest way to get devices connected to industrial and building networks. Just connect, configure and you’re done! HMS offers more than 600 unique network connectivity gateways that connect machines, devices, vehicle networks, PLCs and systems from different vendors.
A protocol converter that connects CANopen devices to Modbus TCP PLCs
The Anybus X-gateway CANopen Master to Modbus TCP Server enables you to connect any CANopen Master device or equipment to Modbus TCP control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects DeviceNet and Modbus TCP control systems
The Anybus X-gateway DeviceNet Adapter to Modbus TCP Server enables you to connect any DeviceNet control system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
I/O Extension Module with Modbus RTU Interface
I/O Extension Module with Modbus RTU Interface - 8 Analog Inputs
Hitachi to KNX - Up to 4 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Hitachi VRF systems to BACnet/IP & MS/TP Application - Up to 4 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to Modbus TCP/RTU - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
Replaced by: IN704DAL1280000
Designed for the integration of any DALI/DALI-2 driver and sensors with a Modbus BMS or any Modbus TCP controller. This integration aimed to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system. Please refer to the new product reference for further details.
ST Cloud Control to BACnet MS/TP or IP or Modbus RTU and TCP - 16 devices
Intesis ST Cloud Control is a bidirectional cloud-based solution to monitor and control any BACnet or Modbus device, whether from a web-based dashboard or an end-user-oriented app. The solution allows the integration of up to 16 devices, with up to 12 widgets per device. Widgets can be shared/split between the devices connected to the same gateway.
Connects CAN/CAN FD components (22 cm, D-Sub 9 plug to socket/plug)
The Ixxat CAN Y-cable (0.22 m length) is used to easily loop through CAN or CAN FD networks. Its shielded design and twisted wires ensure minimal interference and reliable data transmission.
Panasonic to Home Automation - 1 indoor unit
The Panasonic gateway allows complete and natural integration of Panasonic ECOi and PACi Air Conditioner units into IP-based Home Automation Systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi. A wired remote controller can also be connected.
A protocol converter that connects DeviceNet devices to DeviceNet PLCs
The Anybus X-gateway DeviceNet Master to DeviceNet Adapter enables you to connect any DeviceNet device or equipment to DeviceNet control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CANopen devices to CANopen PLCs
The Anybus X-gateway CANopen Master to CANopen Slave enables you to connect any CANopen device or equipment to CANopen control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CANopen devices to DeviceNet PLCs
The Anybus X-gateway CANopen Master to DeviceNet Adapter enables you to connect any CANopen Master device or equipment to DeviceNet control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The ultimate IIoT solution for data visualization and analysis
Combined with an Ewon Flexy or Netbiter, the i4connected IIoT solution enhances the efficiency of complex industrial processes by seamlessly connecting plants, buildings, machines, equipment and sensors – wherever they are – enabling real-time visualization and empowering data-driven decisions.
A protocol converter that connects Modbus Plus and Modbus Plus control systems
The Anybus X-gateway Modbus Plus Slave to Modbus Plus Slave enables you to connect any Modbus Plus system to any Modbus Plus control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.