Gateways (protocol converters) are the fastest way to get devices connected to industrial and building networks. Just connect, configure and you’re done! HMS offers more than 600 unique network connectivity gateways that connect machines, devices, vehicle networks, PLCs and systems from different vendors.
Configurable automotive platform (4 x CAN + 4 x CAN FD, 2 x CAN LS)
The Ixxat FRC-EP190 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based applications. Featuring LIN and eight CAN channels, thereof four CAN FD and two CAN low-speed capable, it's ideal for logging, gateway and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Intelligent CAN-to-CAN bridge
The Ixxat CANbridge NT 200 is a configurable CAN to CAN bridge/router to connect different CAN systems. It offers two CAN channels and supports long-distance communication, with several message processing and multiplexing functionalities. Ideal for efficient network management and system expansion.
CAN Ethernet gateway, bridge and PC interface
The Ixxat CAN@net NT 200 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features two CAN channels and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
CAN repeater with backbone bus
The Ixxat CAN-CR200 repeater with two CAN interfaces and one CAN backbone interface improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. Multiple repeaters can be lined up and connected easily via the integrated DINrail bus to create various topologies and optimize network structures.
Plug-in CANopen module for SIMATIC® S7-1200 systems
The Ixxat CM CANopen is a compact interface module designed for the integration of CANopen or CAN 2.0A devices with SIMATIC S7-1200 automation systems. It offers a cost-efficient solution to achieve PROFINET connectivity for CANopen-based field devices, offering full integration into the Siemens TIA Portal and configuration tool support.
CAN/CAN FD repeater with fiber optics and termination resistor
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
Configurable automotive platform (4 x CAN)
The Ixxat FRC-EP170 CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and up to four CAN channels, one of which is CAN low-speed capable, it is ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
CANopen to PROFINET gateway
The Ixxat CME/PN is a powerful and easily configurable gateway for connecting CANopen devices and networks to PROFINET systems. It enables seamless system integration and bidirectional data exchange, while offering easy configuration via USB or Ethernet. This makes it a flexible, cost-effective solution for CANopen to PROFINET connectivity.
CAN/CAN FD repeater with screw terminals
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
CAN/CAN FD Ethernet gateway, bridge and PC interface
The Ixxat CAN@net NT 420 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features four CAN channels, thereof two CAN FD capable, and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
Configurable automotive platform (4 x CAN, 2 x CAN FD)
The Ixxat CANnector S is a powerful platform for automotive engineering and testing applications, integrating multiple bus systems for efficient logging and gateway operations. It features two LIN and six CAN channels, two of which are CAN FD capable, and is easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Configurable automotive platform (6 x CAN + 2 x CAN FD)
The Ixxat FRC-EP170 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and six CAN channels, thereof two CAN FD and one CAN low-speed capable, it's ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Intelligent CAN-to-CAN bridge with CAN FD support
The Ixxat CANbridge NT 420 is a configurable CAN to CAN bridge/router to connect different CAN/CAN FD systems. It offers four CAN channels, thereof two CAN FD capable, and supports long-distance communication, with several message processing and multiplexing functionalities. Ideal for efficient network management and system expansion.
CAN Ethernet gateway, bridge and PC interface
The Ixxat CAN@net NT 100 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features one CAN channel and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
Configurable automotive platform (4 x CAN, 4 x CAN FD)
The Ixxat CANnector L is a powerful platform for automotive engineering and testing applications, integrating multiple bus systems for efficient logging and gateway operations. It features two LIN and eight CAN channels, four of which are CAN FD capable, and is easily configurable with the Ixxat Advanced Configuration Tool (ACT).
CAN/CAN FD repeater with four channels and termination resistor
The Ixxat CAN-CR300 repeater with four CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.
CAN/CAN FD repeater with four channels
The Ixxat CAN-CR300 repeater with four CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
CAN/CAN FD repeater with 3 kV galvanic isolation
The Ixxat CAN-CR120/HV repeater with two CAN/CAN FD interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures.