Special translators for all major air-conditioning manufacturers, enabling them to get connected to any building network such as KNX, BACnet, Modbus, and Home Automation.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
CAN/CAN FD repeater with fiber optics and termination resistor
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
PC interface card for CAN (1 x CAN), galv. isolated
The Ixxat CAN-IB400/PCI is an active PCI interface card with one CAN channel and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Enable communication between industrial devices and Modbus TCP networks
The Anybus CompactCom 40 Brick Mini Modbus TCP is a communication interface that can be embedded into any industrial device or machine to enable communication with Modbus TCP networks. Soldered directly onto the host’s carrier board and delivered in a tape-and-reel format, it’s ideal for automated manufacturing and high-volume production.
Enable communication between industrial devices and EtherCAT networks
The Anybus CompactCom 40 Brick Mini EtherCAT is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherCAT networks. Soldered directly onto the host’s carrier board and delivered in a tape-and-reel format, it’s ideal for automated manufacturing and high-volume production.
CANopen to PROFINET gateway
The Ixxat CME/PN is a powerful and easily configurable gateway for connecting CANopen devices and networks to PROFINET systems. It enables seamless system integration and bidirectional data exchange, while offering easy configuration via USB or Ethernet. This makes it a flexible, cost-effective solution for CANopen to PROFINET connectivity.
PC interface card for CAN (2 x CAN), galv. isolated
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Enable communication between industrial devices and CC-Link networks
The Anybus CompactCom 40 CC-Link is a communication interface that can be embedded into any industrial device or machine to enable communication with CC-Link networks. The pluggable design enables integration late in the assembly process, the addition of specific network connectors, and compliance with protection class requirements.
The iPC-I 165/ISA is an active ISA PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.
The Ixxat USB-to-CAN compact RJ45 is a USB PC interface with one CAN channel and RJ45 CAN socket. It is used to connect PCs and applications with CAN-based networks.
The Industrial Ethernet Module is a compact PCB with two channels which enables the easy and fast implementation of various industrial Ethernet protocols into customer specific applications.
Ultrasonic tank sensor with a RS-485 modbus interface
Ultrasonic tank sensor with a RS-485 modbus interface
3G multiband 90 degree antenna
3G multiband 90 degree antenna
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
A software tool for testing PROFINET functionality effortlessly
The Anybus PROFINET Master Simulator enables you to set up and test slaves/adapters on PROFINET without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer. Software only.
With Anybus NetTool for DeviceNet, the configuration software for DeviceNet, you can define the DeviceNet configuration for your device. It’s downloaded to the module via the HMS configuration software NetTool-DN or Rockwell´s RSNetWorx. NetTool-DN can be connected via a configuration port on the module, from DeviceNet or the application interface.
The iPC-I 320/PCI II is an active PCI PC interface with up to two CAN channels. It enables the easy connection of PC-based applications to CAN networks and is able to perform data pre-processing on board.