Embedded Network Interfaces | HMS Networks

The easy way to connect your industrial devices

Embedded network interfaces

HMS Networks' embedded interfaces enable industrial devices to connect to any network, allowing manufacturers to focus on their core expertise.

Reduces the time-to-market for new products
Provides connectivity to all major Fieldbus, Industrial Ethernet, and Safety networks
A single hardware design makes it easy to add connectivity to additional networks
Pre-certified for the relevant network organization
World-class customer support

Form factors

Which CompactCom suits you?

Anybus_compactcom_Module_NLW

Anybus

All-in-one Module

Combines hardware, firmware, and network connectors, making it the best choice for fast time-to-market. Slides into a module slot allowing end-users to install it effortlessly.

View products

Anybus_compactcom_Brick_NLW

Anybus

Pluggable Brick

Hardware and firmware are included in a pluggable brick. Fully embedded into your device, it enables you to add specific connectors and comply with protection class requirements.

View products

Latest edition!

Anybus_compactcom_b40_mini_NLW

Anybus

Soldered-on Brick

Soldered-on and optimized for automated manufacturing—making it ideal for high-volume applications. Compact and cost-effective, it is perfect for smaller, less expensive devices.

View products

People_and_Buildings_2023_DSC_1843

Anybus

Learn more

Read about how to choose the right CompactCom for your application, or find out how to kickstart your integration journey on the developer portal.

How to choose Developer portal

Panasonic ECOi, PACi, ECOg / PAC, VRF systems to KNX

Panasonic ECOi, PACi, ECOg / PAC, VRF systems to KNX

Replaced by: IN770AIR00MO000

Item number: INKNXPAN064O000

This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a KNX installation. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.

CHIP-SC143-PIS-LF

CHIP-SC143-PIS-LF

Embedded SoC web controller for Smart Grid Applications

Item number: 00570582

The SC143 includes processor, RAM and FLASH memory, Ethernet and serial interfaces, a complete microcontroller interface with address/data bus, programmable chip selects and GPIO. This embedded platform comes with the preinstalled IPC@CHIP®-RTOS and a lisense for the IEC 61850 stack PIS10.

Anybus Cybersecurity Console - 5 assets

Anybus Cybersecurity Console - 5 assets

Central Plant-Floor Network Security Management

Item number: ABDCC-5

The Anybus Cybersecurity Console (ACC) provides users with a single pane of glass to view and manage as many or as few Anybus Defenders as desired.Fleet management of rules, rulesets, users, user groups, devices, device groups and aliases can be completed simply and quickly by creating collections of configuration options that can be quickly deployed to a system without a loss of production or requiring system downtime.

Large 4" 6-digit LED Dual Counter/Rate Display

Large 4" 6-digit LED Dual Counter/Rate Display

Reliable, rugged and versatile display to visualize your data from a distance

Item number: LD4006P0

The Large 4" 6-digit LED Dual Counter/Rate Display helps you visualize real-time operations data. Display up to 6 digits at 4” (101 mm) in height. Furnish your industrial application with reliable visual display performance that’s durable and easy to program. Network display values using optional serial communication ports.

Anybus X-gateway - DeviceNet Scanner - POWERLINK Device

Anybus X-gateway - DeviceNet Scanner - POWERLINK Device

A protocol converter that connects DeviceNet devices to POWERLINK PLCs

Item number: AB7522-F

The Anybus X-gateway DeviceNet Master to POWERLINK Device enables you to connect any DeviceNet device or equipment to POWERLINK control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.

FSoE MainDevice (Master) Product Line License

FSoE MainDevice (Master) Product Line License

Functional Safety over EtherCAT (FSoE) protocol stack

Item number: 1.02.0502.20100

The Ixxat Functional Safety over EtherCAT (FSoE) product line license enables the implementation of EtherCAT MainDevice (Master) functionalities in safety-critical industrial applications, providing reliable and secure communication. This variant offers unlimited installations within a single customer's product line, which may include various products.

Anybus ProfiTrace Toolkit Standard

Anybus ProfiTrace Toolkit Standard

This tool enables network measurements to troubleshoot issues on running production.

Item number: 37020

ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.

DALI to BACnet IP Server gateway

DALI to BACnet IP Server gateway

Replaced by: IN704DAL1280000

Item number: INBACDAL1280200

Designed for the integration of any DALI/DALI-2 driver and DALI-2 input devices with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make DALI devices, their data and resources, accessible from a BACnet-based control system as if they were a part of the BACnet system itself. Please refer to the new product reference for further details.

308TX Unmanaged Industrial Ethernet Switch

308TX Unmanaged Industrial Ethernet Switch

Item number: 308TX

The 308TX Unmanaged Industrial Ethernet Switch is a robust 8-port 10/100BaseTX switch designed for harsh environments, featuring a wide operating temperature range of -40°C to 70°C. For replacement options, please see the 108TX, 708TX, or NT-5008-000-0000.

306TX Unmanaged Industrial Ethernet Switch

306TX Unmanaged Industrial Ethernet Switch

Item number: 306TX

The 306TX Unmanaged Industrial Ethernet Switch is a rugged 6-port DIN-rail switch featuring six 10/100BaseTX RJ-45 ports with auto-sensing capabilities. For replacement options, please see the 108TX, 708TX, or the NT-5006-DM2-0000.

308FX2 Unmanaged Industrial Ethernet Switch, SC 40km

308FX2 Unmanaged Industrial Ethernet Switch, SC 40km

Item number: 308FXE2-SC-40

The 308FX2 Unmanaged Industrial Ethernet Switch, SC 40km is a robust 8-port industrial switch featuring six 10/100BaseTX RJ-45 ports and two 100BaseFX singlemode fiber ports with SC connectors, enabling extended network distances up to 40km. For replacement options, please see the 708FXE2-SC-40, NT-5008-DM2-0000, NT-5008-FX2-SC40.

305FX Industrial Ethernet Switch with Monitoring, ST 40km

305FX Industrial Ethernet Switch with Monitoring, ST 40km

Item number: 305FXE-N-ST-40

The 305FX Industrial Ethernet Switch with Monitoring, ST 40km, is a 5-port managed switch featuring N-View™ Monitoring Technology, four 10/100BaseTX RJ-45 ports, and one 100BaseFX singlemode 40km fiber port with an ST connector. For replacement options, please see the 105FXE-ST-40, 708FXE2-ST-40, NT-5006-DM2-0000, or the NT-5008-FX2-ST40.

Anybus EtherTAP 1G

Anybus EtherTAP 1G

Mobile measuring of network traffic information for advanced diagnstics

Item number: 513-00021A

The EtherTAP is a mobile monitoring interface that enables the in-depth analysis of PROFINET and EtherNet/IP traffic up to 1Gibt network speed.

Bosch Commercial & VRF systems to Modbus RTU Interface

Bosch Commercial & VRF systems to Modbus RTU Interface

Replaced by: IN770AIR00SO000

Item number: INMBSACA008I000

The Bosch-Modbus gateway allowed bidirectional communication between Bosch Commercial and VRF systems and Modbus RTU (RS-485) networks, bringing total control and supervision of the AC unit through its internal variables. Please refer to the new product reference for further details.

DALI-2 to Modbus TCP

DALI-2 to Modbus TCP

Replaced by: IN704DAL1280000

Item number: INMBSDAL1280200

Designed for the integration of any DALI/DALI-2 driver and sensors with a Modbus BMS or any Modbus TCP controller. This integration aimed to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system. Please refer to the new product reference for further details.

305FX Industrial Ethernet Switch with Monitoring, ST 2km

305FX Industrial Ethernet Switch with Monitoring, ST 2km

Item number: 305FX-N-ST

The 305FX Industrial Ethernet Switch with Monitoring, ST 2km is a rugged 5-port industrial Ethernet switch featuring N-View™ Monitoring Technology, four 10/100BaseTX RJ-45 ports, and one 100BaseFX multimode fiber port with ST connectors. For replacement options, please see the 105FX-ST, 708FX2-ST, NT-5006-DM2-0000, or the NT-5008-FX2-ST00.

306FX2 Industrial Ethernet Switch with Monitoring, SC 15km

306FX2 Industrial Ethernet Switch with Monitoring, SC 15km

Item number: 306FXE2-N-SC-15

The 306FX2 Industrial Ethernet Switch with Monitoring, SC 15km is a rugged 6-port industrial Ethernet switch featuring N-View™ Monitoring Technology, four 10/100BaseTX RJ-45 ports, and two 100BaseFX singlemode fiber ports with SC connectors. For replacement options, please see the 106FXE2-SC-15, 708FEX2-SC-15, NT-5006-DM2-0000, or the NT-5008-FX2-SC15.

302MC Industrial Media converters, ST 15km

302MC Industrial Media converters, ST 15km

Item number: 302MCE-ST-15

The 302MC Industrial Media converters, ST 15km, is an unmanaged, plug-and-play device that seamlessly converts 10/100BaseTX to 100BaseFX, featuring one RJ-45 port and one 100BaseFX singlemode 15km fiber port with ST connectors.