Embedded network interfaces

Item number: INKNXDAI001I100

The Daikin-KNX interface allows full bidirectional communication between Daikin AC Domestic units and KNX installations. It has four potential-free binary inputs available to integrate and configure external devices (window contacts or presence detectors) to improve energy efficiency.

Item number: IN770AIR00MO000

The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.

Item number: INWMPMIT001I000

The Mitsubishi Electric gateway allows complete and natural integration of Mitsubishi Electric Domestic, Mr. Slim, and City Multi Air Conditioner units into IP-based Home Automation systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi.

Item number: IN770AIRXXSO000

The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.

Item number: IN770AIRXXSO000

The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.

Item number: INWMPDAI001R000

The Daikin gateway allows complete and natural integration of Daikin VRV and Sky systems into IP-based Home Automation Systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi. A wired remote controller can also be connected.

Item number: IN775FGLXXSO000

The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.

Item number: AB4515-B

Item number: 024850-B

This adapter board gives an Anybus CompactCom Module the possibility to connect to the STM3240G-EVAL board. On this interface, the serial (UART), SPI, 8-bit parallel, and 16-bit parallel host communication interfaces are available. Please note, Anybus CompactCom Modules must be ordered separately.

Item number: AB6668-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Item number: 017505

The Anybus PROFIBUS-DPV1 Master Simulator enables you to set up and test slaves/adapters on PROFIBUS-DPV1 without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.

Item number: AB6224-C

Item number: 4701-001000

i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.

Item number: AB7802-F

The Anybus X-gateway PROFIBUS Master to DeviceNet Adapter enables you to connect any PROFIBUS device or equipment to DeviceNet control systems. It can be used when there is no existing PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.

Item number: 3001-004000

i4bacnet is equipped with many features that allow you to create a complete BACnet BMS in no time. You can use it with all browsers and on all devices independent of the operating system.

Item number: AB7317-B

The Anybus Communicator – CAN to PROFINET-IO converts CAN protocols to PROFINET-IO, enabling you to connect any CAN-based device or equipment to PROFINET-IO control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use. 

Item number: 1.02.0501.00100

The Ixxat Common Industrial Protocol (CIP) Safety development license enables the implementation of CIP Safety Originator devices on EtherNet/IP. It is an advanced solution for reliable and secure communication in industrial environments. This variant includes 10 initial royalties, with the option to purchase more upon consumption (including 12 months updates and maintenance).

Item number: AB7544-F

The Anybus X-gateway POWERLINK Device to POWERLINK Device enables you to connect any POWERLINK system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.