Intesis MAPS
Take the complexity out of the integration process: Create your project with a predefined template, configure the needed parameters, enable the desired signals, and check the communication between the gateway and the system.
Midea to KNX
注文番号 IN770AIR00SO000
KNX設備からMidea業務用およびVRFシステムを双方向で制御および監視できるように特別に設計されています。 1つのインターフェイスから最大64台の室内機を統合できます。
The gateway supports all KNX standard data points (DPTs) to ensure full interoperability.
The gateway is connected directly to the outdoor units' communication bus. One single gateway enables centralized access to the entire VRF system.
Scan the bus and find all the units connected to the VRF system with their control signals.Now, the Midea gateway provides signals from the outdoor units as well.
The gateway's Power Estimation Algorithm allows you to estimate the energy consumption of each indoor unit present in the VRF system
Choose the license that better fits your needs (XXS - 4 indoor units, S - 16 indoor units, M - 64 indoor units), or upgrade your current license. Your project's dimensions and your budget are covered.
This gateway is compatible with Midea V4, V6, and V8 series.
Intesis MAPS is the user-friendly, in-house-developed configuration tool that enables you to maximize the potential of Intesis gateways. Simply select your template and eliminate the need for tedious manual signal mapping.
Both the Intesis MAPS configuration tool and the interface's firmware can receive automatic updates to improve the product's functionality.
Take the complexity out of the integration process: Create your project with a predefined template, configure the needed parameters, enable the desired signals, and check the communication between the gateway and the system.
HMSでは、製品や技術などに関するトレーニングを提供しています。オンサイト・オンライントレーニング、またはEラーニング講座など、さまざまな形でご提供しています。