SMA quadband antenna (angled)
3G multiband 90 degree antenna
Item number: E-021
3G multiband 90 degree antenna
Special translators for all major air-conditioning manufacturers, enabling them to get connected to any building network such as KNX, BACnet, Modbus, and Home Automation.
3G multiband 90 degree antenna
3G multiband 90 degree antenna
A protocol converter that connects serial devices to PROFIBUS control systems
The Anybus Communicator Serial Master to PROFIBUS IO-Device ATEX enables you to connect any RS-232/485 device or equipment to PROFIBUS control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A protocol converter that connects PROFIBUS and OPC UA-MQTT control systems
The Anybus X-gateway PROFIBUS Slave to OPC UA-MQTT enables you to connect any PROFIBUS system to any OPC UA-MQTT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable communication between industrial devices and EtherNet/IP networks
The Anybus CompactCom 40 M12 Without Housing - EtherNet/IP is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherNet/IP networks. The module version includes network connectors to simplify installation, helping you achieve a fast time to market.
Hitachi to KNX - Up to 4 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Hitachi VRF systems to BACnet/IP & MS/TP Application - Up to 4 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to Modbus TCP/RTU - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
Replaced by: IN704DAL1280000
Designed for the integration of any DALI/DALI-2 driver and sensors with a Modbus BMS or any Modbus TCP controller. This integration aimed to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system. Please refer to the new product reference for further details.
ST Cloud Control to BACnet MS/TP or IP or Modbus RTU and TCP - 16 devices
Intesis ST Cloud Control is a bidirectional cloud-based solution to monitor and control any BACnet or Modbus device, whether from a web-based dashboard or an end-user-oriented app. The solution allows the integration of up to 16 devices, with up to 12 widgets per device. Widgets can be shared/split between the devices connected to the same gateway.
Connects CAN/CAN FD components (22 cm, D-Sub 9 plug to socket/plug)
The Ixxat CAN Y-cable (0.22 m length) is used to easily loop through CAN or CAN FD networks. Its shielded design and twisted wires ensure minimal interference and reliable data transmission.
Serial connection cable for Scneider PLC
This cable can be used to connect the Ewon Flexy serial port to the MiniDin port of Schneider Micro, Premium and Twidoserial PLCs
Panasonic to Home Automation - 1 indoor unit
The Panasonic gateway allows complete and natural integration of Panasonic ECOi and PACi Air Conditioner units into IP-based Home Automation Systems. The device connects to the indoor unit through a direct cable and to the Home Automation interface via Wi-Fi. A wired remote controller can also be connected.
A protocol converter that connects Modbus TCP devices to CANopen PLCs
The Anybus X-gateway Modbus TCP Client to CANopen Slave enables you to connect any Modbus TCP device or equipment to CANopen control systems. It can be used when there is no existing Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects DeviceNet devices to DeviceNet PLCs
The Anybus X-gateway DeviceNet Master to DeviceNet Adapter enables you to connect any DeviceNet device or equipment to DeviceNet control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CANopen devices to CANopen PLCs
The Anybus X-gateway CANopen Master to CANopen Slave enables you to connect any CANopen device or equipment to CANopen control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.