USS master to Profinet-IO device Gateway

The Anybus Communicator “USS” gateway interconnects Siemens Drives with USS-Interface to Profinet IO. The Gateway acts as “Device/Slave” on the Profinet side and operates as Master on the USS side. Up to 31 drives with USS-Interface can be simultaneously connected to one Anybus USS Gateway. The Gateway permits parameterization, monitoring and control of the drives via Profinet IO.

Gateway configuration of the Profinet side as well as the USS master side is made using a Profinet configuration tool, eg. Siemens Step7. The Anybus Communicator USS Gateway was jointly developed by HMS and Siemens and is tested and approved for usage with the SIMOVERT MASTERDRIVES series, the MICROMASTER MM4xx series and SINAMICS G110

	KEY FEATURES
	Max. 512 bytes of Input data and 512 bytes of Output data
	Supports Siemens serial USS protocol via RS485
	Selectable serial Baudrates between 9,6 kbit/s and 38,4kbit/s
	Multi-drop up to 31 nodes on USS side
	Profinet-IO device with Real Time functions
	USS configuration via GSD file in Siemens Step7 configuration tool

TECHNICAL SPECIFICATIONS
Size:	120 mm x 75 mm x 27 mm
Power Supply:	24 VDC
Temperature:	0-55°C
Current Consump:	Max 280 mA
Baud Rate:	100 Mbit
Sub Baud Rate:	9,6 kbit/s up to 38,4kbit/s
Mech Rating:	IP20
Req Software:	Profinet IO configuration tool
Config Method:	GSD file
Humidity:	0-95 % non condensed
Certified:	CE, UL, cUL
Fieldbus conformance:	Tested and verfied for Profinet-IO conformance
Galvanic isolation:	Standard for both bus side and serial side
Order Code:	AB7043