Modbus Plus Serial Gateway

The Anybus Communicator Gateway for Modbus Plus is an external DIN-rail mounted gateway which provides Modbus Plus network connectivity via a serial RS232/RS422/RS485 interface. The Communicator contains a conformance tested Anybus-S Modbus Plus interface.

It has serial protocol support for Modbus RTU Master Mode and Generic Data Mode which is fully configurable through the Anybus Configuration Manager and the configuration port on the AnyBus Communicator. Other protocols can be implemented by HMS on request.

The delivery comes complete with a DSUB connector with screw terminals for the serial sub-network, CD with Configuration Software and User Manuals, RS232 Configuration Cable and a short Installation Leaflet for the electrical installation.

	KEY FEATURES
	RS232/422/485 selection possible
	CE, UL & cUL marked
	DIN-rail mountable - PE via DIN-rail
	Max 32 Words Global Data and 512 bytes Register data
	Supports Modbus RTU Master mode, Generic Data mode and DF1 mode on Sub Network side
	Anybus Configuration Manager for easy configuration

TECHNICAL SPECIFICATIONS
Size:	120 mm x 72 mm x 27 mm
Power Supply:	24 VDC
Temperature:	0 to +55°C
Current Consump:	Max 300 mA
Baud Rate:	1 Mbit/s
Sub Baud Rate:	1.2, 2.4, 4.8, 9.6, 19.2, 35.7, 38.4, 57,6 kbit/s
I/O Input:	Max 32 Words Global Data and 512 Words Register Data
I/O Output:	Max 32 Words Global Data and 512 Words Register Data
Mech Rating:	IP20
Supp Features:	Global Data Base Transaction: Point-to-Point commands: Read holding registers, Preset single register, Preset muliple register, Allows routing up to 6 networks
Config Method:	Anybus Configuration Manager for Windows
Appl Interface:	RS232/422/485 selected via software
Included accessories:	CD with software and User Manuals, Configuration Cable RS232, DSUB with screw terminals for Sub-Network, Installation Leaflet.
Galvanic isolation:	Standard for both bus side and serial side
Order Code:	AB7002